{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001M11F1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001M11F1000","canonicalUrl":"https://aoctrl.com/schneider/SH31001M11F1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001M11F1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31001M11F1000, 660 W continuous power, 9 N·m holding torque, absolute single-turn SinCos Hiperface encoder, IP54/IP65, 100 mm flange.","salesMarkdown":"## Speed and torque across the voltage range The SH31001M11F1000: This motor's nominal speed depends on what line voltage you feed it: 625 rpm on 115 V single-phase, 1250 rpm on 230 V single-phase, 2500 rpm on 400 V three-phase, and 3000 rpm on 480 V three-phase. That means the same frame covers both a low-speed indexing station and a higher-speed conveyor pick — just match the drive voltage to the target speed. Nominal torque also shifts with supply: 2.8 N·m at 115 V single-phase, 2.71 N·m at 230 V single-phase, and 2.52 N·m at both 400 V and 480 V three-phase. The torque drop from single-phase to three-phase is about 10 %, so if the load needs the full 2.8 N·m, you stay on 115 V single-phase; if speed matters more, you go three-phase and accept the slight torque reduction. ## Brake and encoder — what they lock in The holding brake delivers 9 N·m (79.7 lbf·in) — enough to hold a vertical-axis load stationary when the drive is off. That brake is integral, not a bolt-on, so the motor length is fixed at 199.5 mm including the brake section. Feedback comes from an absolute single-turn SinCos Hiperface encoder. Single-turn means the position is known within one revolution after power-up — no homing cycle needed for rotary tables or pick-and-place axes that never rotate more than 360°. ## Environmental sealing and mounting The motor carries IP54 at the shaft bushing without the shaft seal ring, and IP65 with the seal ring fitted. IP65 means it handles washdown spray from any direction — suitable for food, beverage, or wash-down zones where the motor gets hosed down. Mounting is via a 100 mm international standard flange (IEC 60034-5) with a 95 mm centring collar and four 9 mm mounting holes. The shaft is 19 mm diameter with a parallel key, 40 mm shaft length — a standard NEMA/IEC interface that mates with most gearboxes and couplings without an adapter plate.","metaTitle":"Schneider Electric SH31001M11F1000 Servo Motor with Brake","metaDescription":"Schneider Electric SH31001M11F1000 servo motor with brake, 660 W continuous power, 9 N·m holding torque, absolute Hiperface encoder, IP54/IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.9 in (199.5 mm)","Inertia":"0.618 kg.cm² of brake 1.4 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"625 rpm 115 V single phase 1250 rpm 230 V single phase 2500 rpm 400 V three phase 3000 rpm 480 V three phase","Rotor inertia":"2.018 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"24.8 lbf.in (2.8 N.m) 115 V single phase 23.99 lbf.in (2.71 N.m) 230 V single phase 22.30 lbf.in (2.52 N.m) 400 V three phase 22.30 lbf.in (2.52 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.63 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"660 W","Mounting Support":"International standard flange","Sizing reference":"SH31001M","Back emf constant":"115 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"34.7 mH","Stator resistance":"13.9 Ohm","Maximum current Irms":"6.3 A","Nominal output power":"210 W 115 V single phase 410 W 230 V single phase 790 W 400 V three phase 930 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"6.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/907939dac5b64997d7fcfe2f5f52392b.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31001M11F1000/sh3-servomotor-100mm-1-stack-high-torque-keyed-shaft-sincos-singleturn-128-brake-straight-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31001M11F1000/alternatives.json"},"ai":{"faq":[{"question":"What is the holding torque of the brake on SH31001M11F1000?","answer":"The holding brake delivers 9 N·m (79.7 lbf·in). That's enough to hold a vertical load stationary when the drive is powered off."},{"question":"What encoder type does SH31001M11F1000 use?","answer":"Absolute single-turn SinCos Hiperface encoder. Single-turn means position is known within one revolution after power-up — no homing cycle needed for rotary applications under 360°."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001M11F1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001M11F1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}