{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001M11F1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001M11F1100","canonicalUrl":"https://aoctrl.com/schneider/SH31001M11F1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001M11F1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31001M11F1100, 660 W continuous power, 3000 rpm at 480 V three-phase, 100 mm flange, IP65, absolute single-turn SinCos Hiperface encoder.","salesMarkdown":"## 660 W, 3000 rpm — SH3 servo motor with holding brake The SH31001M11F1100 is a Schneider Electric SH3 series servo motor with an integrated holding brake, rated for 660 W continuous power. It delivers a nominal speed of 3000 rpm when fed from a 480 V three-phase supply, with the speed scaling down to 625 rpm at 115 V single-phase input. The holding brake provides 9 N.m of holding torque — this is the figure that matters for vertical-axis loads where the motor must hold position when power is removed. The continuous stall torque is 2.94 N.m across the 115–480 V three-phase range, with nominal torque derating from 2.8 N.m at 115 V to 2.52 N.m at 480 V. ## Absolute feedback and IP65 sealing The motor carries an absolute single-turn SinCos Hiperface encoder — no homing cycle needed on power-up; the position is known immediately. This encoder type is common on Schneider Lexium drive families, so the feedback interface is a standard match for the corresponding drive. IP65 protection per IEC 60034-5 applies to both the motor body and the shaft bushing, meaning the motor withstands washdown and wet environments without additional shrouding. The 100 mm international standard flange (3.9 in) with a 95 mm centring collar and 9 mm mounting holes fits standard motor mounts.","metaTitle":"Schneider Electric SH31001M11F1100 Servo Motor with Brake","metaDescription":"Schneider Electric SH31001M11F1100 SH3 servo motor with holding brake. 660 W continuous power, 3000 rpm at 480 V three-phase, IP65, absolute Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.9 in (199.5 mm)","Inertia":"0.618 kg.cm² of brake 1.4 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"625 rpm 115 V single phase 1250 rpm 230 V single phase 2500 rpm 400 V three phase 3000 rpm 480 V three phase","Rotor inertia":"2.018 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"24.8 lbf.in (2.8 N.m) 115 V single phase 23.99 lbf.in (2.71 N.m) 230 V single phase 22.30 lbf.in (2.52 N.m) 400 V three phase 22.30 lbf.in (2.52 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.63 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"660 W","Mounting Support":"International standard flange","Sizing reference":"SH31001M","Back emf constant":"115 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"34.7 mH","Stator resistance":"13.9 Ohm","Maximum current Irms":"6.3 A","Nominal output power":"210 W 115 V single phase 410 W 230 V single phase 790 W 400 V three phase 930 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"6.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/2ab1217b86d56832e0d7854b9abccad6.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH31001M11F1100/sh3-servomotor-100mm-1-stack-high-torque-keyed-shaft-sincos-singleturn-128-brake-straight-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31001M11F1100/alternatives.json"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH31001M11F1100?","answer":"Submit an RFQ for current pricing and availability confirmation at quote time."},{"question":"What is SH31001M11F1100's listed phase and speed range?","answer":"The motor is a three-phase design. Nominal speed depends on supply: 625 rpm at 115 V single phase, 1250 rpm at 230 V single phase, 2500 rpm at 400 V three phase, and 3000 rpm at 480 V three phase."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001M11F1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001M11F1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}