{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001M12A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001M12A2200","canonicalUrl":"https://aoctrl.com/schneider/SH31001M12A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001M12A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31001M12A2200, 660 W continuous power, 2.8 Nm nominal torque at 400 V three-phase, absolute multiturn SinCos Hiperface encoder, IP65/IP67, without holding brake.","salesMarkdown":"## Speed-torque envelope across supply voltages The SH31001M12A2200 delivers 660 W continuous power from a 100 mm flange frame, but the speed and torque available depend entirely on the supply voltage feeding the drive. At 400 V three-phase — the nominal condition — the motor produces 2.52 Nm at 2500 rpm nominal speed, with a continuous stall torque of 2.94 Nm across the 115–480 V three-phase range. On 480 V three-phase it reaches 3000 rpm at the same 2.52 Nm, while single-phase 115 V drops to 625 rpm and 2.8 Nm. The peak stall torque hits 9.6 Nm regardless of the three-phase voltage level, which sets the acceleration ceiling for the load. ## Encoder feedback and environmental sealing The absolute multiturn SinCos Hiperface encoder provides position feedback over a single cable pair — the sine/cosine tracks give interpolated position within a revolution, while the Hiperface protocol transmits the multiturn count over the same wires. The motor carries IP65 on the body and shaft bushing, with IP67 on the housing — the sealing washer at the connector face is the wet-end barrier, not the housing thread, so the straight or rotatable right-angle connector must be torqued to the panel specification before washdown exposure. The 19 mm shaft with a parallel key and 40 mm shaft length mates to standard metric couplings and pulleys. Maximum radial force at 3000 rpm is 630 N, dropping to 530 N at 5000 rpm — the bearing life calculation must respect this derating if the application runs above the nominal speed. Maximum axial force is 160 N, which limits direct-drive thrust loads without an external thrust bearing.","metaTitle":"Schneider Electric SH31001M12A2200 Servo Motor, 660 W","metaDescription":"Schneider Electric SH31001M12A2200 SH3 servo motor, 660 W continuous power, 2.8 Nm nominal torque at 400 V three-phase.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.6 in (168.5 mm)","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"625 rpm 115 V single phase 1250 rpm 230 V single phase 2500 rpm 400 V three phase 3000 rpm 480 V three phase","Rotor inertia":"1.4 kg.cm²","Nominal torque":"24.8 lbf.in (2.8 N.m) 115 V single phase 23.99 lbf.in (2.71 N.m) 230 V single phase 22.30 lbf.in (2.52 N.m) 400 V three phase 22.30 lbf.in (2.52 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.63 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"660 W","Mounting Support":"International standard flange","Sizing reference":"SH31001M","Back emf constant":"115 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"99.15 mH","Stator resistance":"13.9 Ohm","Maximum current Irms":"6.3 A","Nominal output power":"210 W 115 V single phase 410 W 230 V single phase 790 W 400 V three phase 930 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/8f6a599d5113ffd2210bca1fff15cca2.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31001M12A2200/sh3-servomotor-100mm-1-stack-high-torque-keyed-shaft-sincos-multiturn-128-no-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31001M12A2200/alternatives.json"},"ai":{"faq":[{"question":"What is the nominal torque of SH31001M12A2200 at 400 V three-phase?","answer":"At 400 V three-phase the nominal torque is 2.52 Nm (22.30 lbf.in) at 2500 rpm, with a continuous stall torque of 2.94 Nm across the 115–480 V three-phase range."},{"question":"What encoder type does SH31001M12A2200 use?","answer":"The motor uses an absolute multiturn SinCos Hiperface encoder, providing both incremental sine/cosine position within a revolution and absolute multiturn count over the same signal pair."},{"question":"Does SH31001M12A2200 include a holding brake?","answer":"No, this variant is supplied without a holding brake. The load must be held mechanically or by the drive's holding torque at standstill."},{"question":"What IP rating does SH31001M12A2200 carry?","answer":"The motor body and shaft bushing are rated IP65, and the housing is rated IP67, all conforming to IEC 60034-5. This makes it suitable for washdown environments provided the connector is properly torqued."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001M12A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001M12A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}