{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001M12F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001M12F2000","canonicalUrl":"https://aoctrl.com/schneider/SH31001M12F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001M12F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31001M12F2000, 660 W continuous power, 9 N.m holding torque, absolute multiturn SinCos Hiperface encoder, IP65, three-phase, 100 mm flange.","salesMarkdown":"## 660 W servo with 9 N.m holding brake — envelope and feedback The SH31001M12F2000 is a three-phase servo motor from Schneider Electric's SH3 series, delivering 660 W continuous power and a nominal torque range of 2.52 to 2.8 N.m depending on supply voltage (115 V single-phase through 480 V three-phase). It includes a holding brake rated at 9 N.m, making it suitable for vertical-axis or gravity-loaded applications where the load must be held when power is removed. The motor is 199.5 mm long with a 100 mm flange and a 19 mm shaft with parallel key — standard dimensions that fit common servo mounts. Feedback comes from an absolute multiturn SinCos Hiperface encoder, which provides position and speed data without needing a homing cycle after power-up — critical for applications requiring absolute position retention. ## Speed and torque profile across supply voltages Nominal speed varies with supply: 625 rpm at 115 V single-phase, 1250 rpm at 230 V single-phase, 2500 rpm at 400 V three-phase, and 3000 rpm at 480 V three-phase — the motor's performance scales with available line voltage. Nominal torque also shifts: 2.8 N.m at 115 V single-phase, 2.71 N.m at 230 V single-phase, and 2.52 N.m at both 400 V and 480 V three-phase, so the torque curve is relatively flat across the voltage range. Peak stall torque reaches 9.6 N.m (115–480 V three-phase), and continuous stall torque is 2.94 N.m — useful for sizing the motor against peak load transients. The motor has 4 poles, a torque constant of 1.63 N.m/A at 120 °C, and a back EMF constant of 115 V/krpm at 20 °C. ## Environmental sealing and cooling — IP65 with natural convection IP65 protection (conforming to IEC 60034-5) on the motor body and shaft bushing means the motor withstands dust ingress and low-pressure water jets — typical for washdown or dusty environments. Cooling is by natural convection — no fan, so the motor relies on its surface area and mounting plate for heat dissipation; derating may be needed in enclosed or high-ambient installations. The electrical connection uses a rotatable right-angled connector, which helps route the cable in tight panels without bending the cable beyond its minimum radius. Maximum radial force at the shaft is 900 N at 1000 rpm, dropping to 530 N at 5000 rpm — pay attention to belt or direct-drive loads that apply side force at speed. ## Sourcing and lifecycle — current production, quoted to order No official successor or cross-reference is listed — the SH31001M12F2000 is the direct order code for this configuration.","metaTitle":"Schneider Electric SH31001M12F2000 Servo Motor, 660 W","metaDescription":"Schneider Electric SH31001M12F2000 servo motor with brake, 660 W continuous power, 9 N.m holding torque, absolute multiturn Hiperface encoder, IP65, current","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.9 in (199.5 mm)","Inertia":"0.618 kg.cm² of brake 1.4 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"625 rpm 115 V single phase 1250 rpm 230 V single phase 2500 rpm 400 V three phase 3000 rpm 480 V three phase","Rotor inertia":"2.018 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"24.8 lbf.in (2.8 N.m) 115 V single phase 23.99 lbf.in (2.71 N.m) 230 V single phase 22.30 lbf.in (2.52 N.m) 400 V three phase 22.30 lbf.in (2.52 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.63 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"660 W","Mounting Support":"International standard flange","Sizing reference":"SH31001M","Back emf constant":"115 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"34.7 mH","Stator resistance":"13.9 Ohm","Maximum current Irms":"6.3 A","Nominal output power":"210 W 115 V single phase 410 W 230 V single phase 790 W 400 V three phase 930 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"6.3 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/aa2626b374d39e25e333925345f30f48.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH31001M12F2000/sh3-servomotor-100mm-1-stack-high-torque-keyed-shaft-sincos-multiturn-128-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31001M12F2000/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy SH31001M12F2000 and how do I get a price?","answer":"The SH31001M12F2000 is sourced through independent distribution."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001M12F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001M12F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}