{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001P01F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001P01F1200","canonicalUrl":"https://aoctrl.com/schneider/SH31001P01F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001P01F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH31001P01F1200 SH3 series servo motor with brake, 1190 W continuous power, 9 N·m holding brake, IP65, absolute single-turn SinCos Hiperface encoder, smooth shaft, 100 mm flange.","salesMarkdown":"## 1190 W servo motor with holding brake — SH31001P01F1200 The SH31001P01F1200 is a Schneider Electric SH3 series servo motor with an integrated holding brake, rated for 1190 W continuous power. It's a three-phase motor with a 100 mm flange and a smooth shaft, built for applications that need a positive stop when power is removed — think vertical-axis gantries or Z-axis stages where the load must not drift. The holding brake delivers 9 N·m (79.7 lbf·in) of holding torque, which is separate from the motor's nominal torque. That means the brake holds the load at rest even when the drive is off, without relying on the motor's magnetic detent or a mechanical lock. ## Speed and torque across supply voltages This motor's speed and torque vary significantly with the input voltage. On 400 V three-phase, nominal speed is 5000 rpm with 2.27 N·m nominal torque; on 480 V three-phase, it reaches 6000 rpm at the same torque. On single-phase 115 V, nominal speed drops to 1250 rpm with 2.91 N·m, and on 230 V single-phase it's 2500 rpm at 2.64 N·m. The peak stall torque is 9.6 N·m across the 115–480 V three-phase range. Continuous stall torque is 2.94 N·m across the same three-phase range, and the motor can deliver 12.0 A peak for 3 seconds. The torque constant is 0.84 N·m/A at 120 °C copper temperature, and the back EMF constant is 60 V/krpm at 20 °C — useful numbers for tuning the drive's current loop and setting the velocity observer. ## Encoder, IP rating, and mechanical fit The encoder is an absolute single-turn SinCos Hiperface type — single-turn means it reports position within one revolution at power-up without a homing move. The motor carries an IP65 rating on the housing and shaft bushing per IEC 60034-5, with IP67 on the housing itself. That makes it suitable for washdown environments, though the connector must be mated properly to maintain the seal. Mechanically, it uses an international standard flange with a 100 mm centring collar diameter and 3.5 mm depth. The smooth shaft is 19 mm diameter by 40 mm long. The electrical connection is via a rotatable right-angled connector or a straight connector — both options are listed, so you can route the cable in the direction that fits your cable tray or drag chain.","metaTitle":"Schneider Electric SH31001P01F1200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31001P01F1200 servo motor with brake, 1190 W continuous power, IP65, absolute single-turn encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31001P01F1200","Length":"7.9 in (199.5 mm)","Inertia":"0.618 kg.cm² of brake 1.4 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 100mm, 1 stack, smooth Shaft, SinCos Singleturn 128, Brake, straight, IP65/67","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"1250 rpm 115 V single phase 2500 rpm 230 V single phase 5000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"2.018 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"25.76 lbf.in (2.91 N.m) 115 V single phase 23.37 lbf.in (2.64 N.m) 230 V single phase 20.09 lbf.in (2.27 N.m) 400 V three phase 20.09 lbf.in (2.27 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"0.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1190 W","Mounting Support":"International standard flange","Sizing reference":"SH31001P","Back emf constant":"60 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"9.5 mH","Stator resistance":"3.8 Ohm","Maximum current Irms":"12.0 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1410 W 400 V three phase 1630 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"12.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/98543c520d82a5cdba2c919a3550f734.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31001P01F1200/sh3-servomotor-100mm-1-stack-smooth-shaft-sincos-singleturn-128-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"What is the phase configuration of SH31001P01F1200?","answer":"It is a three-phase motor, though it can also run on single-phase 115 V or 230 V with reduced speed and torque."},{"question":"What is the IP rating of this motor?","answer":"IP65 on the motor body and shaft bushing, IP67 on the housing — per IEC 60034-5. The connector must be mated to maintain the seal."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001P01F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001P01F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}