{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001P02A1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001P02A1200","canonicalUrl":"https://aoctrl.com/schneider/SH31001P02A1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001P02A1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31001P02A1200, three-phase, 5000 rpm at 400 V, 2.27 N.m nominal torque, 1.19 kW continuous power, IP65, absolute multiturn SinCos Hiperface encoder, smooth shaft, without brake, 100 mm flange.","salesMarkdown":"## Three-phase servo with speed-torque flexibility across supply voltages The SH31001P02A1200 is a Schneider Electric SH3 series servo motor designed for three-phase supply, delivering a nominal speed of 5000 rpm at 400 V three-phase and 6000 rpm at 480 V three-phase. Nominal torque ranges from 2.91 N.m at 115 V single-phase down to 2.27 N.m at 400 V or 480 V three-phase, so the available torque depends on the drive supply voltage — a critical factor when retrofitting into an existing cabinet with a fixed bus voltage. Continuous power is rated at 1190 W, with nominal output power reaching 1630 W at 480 V three-phase, making this motor suited for medium-duty positioning or indexing applications where sustained throughput matters. ## Encoder feedback and environmental sealing for washdown duty The absolute multiturn SinCos Hiperface encoder provides position feedback without a home cycle on power-up — the drive reads the absolute position from the encoder, which is essential for applications where the machine must resume operation immediately after a power loss. IP65 rating on the motor body and shaft bushing, with IP67 on the housing, means this motor withstands direct washdown in food-and-beverage or pharmaceutical lines — the shaft seal and housing gasket keep water out during hose-down cleaning cycles. Natural convection cooling (no external fan) means the motor relies on its own surface area and airflow from the machine motion to dissipate heat — at low speeds or in still-air enclosures, the continuous torque must be derated below the 2.94 N.m continuous stall figure. ## Mechanical interface — smooth shaft, no brake, standard flange The smooth shaft (no keyway) with a 19 mm diameter and 40 mm shaft length requires a clamping-type coupling or pulley — no key to transmit torque, so the clamping force must be verified against the peak torque of 9.6 N.m to prevent slip during acceleration. Without a holding brake, the motor cannot hold the load at standstill when power is removed — the machine design must include an external brake or a self-locking mechanism (e.g., a leadscrew with backdrive prevention) for vertical-axis or safety-hold applications. The 100 mm international standard flange (IEC/NEMA compatible) with a 95 mm centring collar and 9 mm mounting holes bolts directly to standard gearboxes or machine frames — the 3.5 mm centring collar depth ensures concentric alignment. ## Electrical parameters for drive sizing and tuning Stator resistance of 3.8 Ohm and inductance of 9.5 mH define the electrical time constant and current ripple — a drive with a switching frequency below 4 kHz may see increased ripple current and additional motor heating at low speeds. The torque constant of 0.84 N.m/A at 120°C (hot motor) and back EMF constant of 60 V/krpm at 20°C are the key parameters for the drive's current loop tuning and velocity loop gain — the drive must be configured with these values for stable operation across the speed range. Maximum continuous stall current is 3.5 A, while the peak current (3-second rating) is 12.0 A — the drive must be sized to supply 12 A for acceleration transients and 3.5 A continuously at standstill without tripping on overcurrent. The electrical connection offers both a rotatable right-angled connector and a straight connector option — the cable exit direction can be adjusted in the field to fit tight cable-tray routing or panel entry points. Maximum radial force on the shaft is speed-dependent: 900 N at 1000 rpm, dropping to 530 N at 5000 rpm — belt-driven loads must be checked against this curve to avoid bearing overload at the operating speed.","metaTitle":"Schneider Electric SH31001P02A1200 Servo Motor, 5000 rpm","metaDescription":"Schneider Electric SH31001P02A1200 SH3 servo motor, three-phase, 5000 rpm at 400 V, 2.27 N.m nominal torque, IP65, absolute Hiperface encoder, smooth shaft, no","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31001P02A1200","Length":"6.6 in (168.5 mm)","Inertia":"0.0 kg.cm² of brake 1.4 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 100mm, 1 stack, smooth Shaft, SinCos Multiturn 128, no Brake, straight, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"1250 rpm 115 V single phase 2500 rpm 230 V single phase 5000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"1.4 kg.cm²","Nominal torque":"25.76 lbf.in (2.91 N.m) 115 V single phase 23.37 lbf.in (2.64 N.m) 230 V single phase 20.09 lbf.in (2.27 N.m) 400 V three phase 20.09 lbf.in (2.27 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"0.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1190 W","Mounting Support":"International standard flange","Sizing reference":"SH31001P","Back emf constant":"60 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"9.5 mH","Stator resistance":"3.8 Ohm","Maximum current Irms":"12.0 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1410 W 400 V three phase 1630 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"12.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/cf81b08d4b3976a8644a99b1bc5dbc2b.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH31001P02A1200/sh3-servomotor-100mm-1-stack-smooth-shaft-sincos-multiturn-128-no-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"What is the nominal speed of SH31001P02A1200 at 400 V three-phase?","answer":"The nominal speed is 5000 rpm at 400 V three-phase supply. At 480 V three-phase it reaches 6000 rpm, and at 230 V single-phase it runs at 2500 rpm."},{"question":"Does SH31001P02A1200 include a holding brake?","answer":"No, this variant is supplied without a holding brake. For vertical-axis or safety-hold applications, an external brake must be added to the machine design."},{"question":"What encoder type does SH31001P02A1200 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder, which provides absolute position feedback without requiring a homing cycle after power-up."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001P02A1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001P02A1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}