{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001P02A2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001P02A2100","canonicalUrl":"https://aoctrl.com/schneider/SH31001P02A2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001P02A2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31001P02A2100, 1190 W continuous power, three-phase, IP65, absolute multiturn SinCos Hiperface encoder, smooth 19 mm shaft, without holding brake.","salesMarkdown":"## Supply-voltage-dependent performance — the spec that decides the application The SH31001P02A2100: This SH3 servo motor delivers different speed-torque-power combinations depending on the supply voltage. On three-phase 400 V it reaches 5000 rpm nominal speed with 2.27 N.m nominal torque and 1410 W output power; on 480 V three-phase the same torque holds but output climbs to 1630 W. On single-phase 230 V the nominal speed drops to 2500 rpm with 2.64 N.m torque and 790 W output; on 115 V single-phase it runs 1250 rpm at 2.91 N.m and 410 W. The continuous power rating of 1190 W sits between the single-phase and three-phase nominal outputs — a useful reference for sizing the drive and thermal budget. The continuous stall torque is 2.94 N.m across the 115–480 V three-phase range, with a continuous stall current of 3.5 A. Peak stall torque reaches 9.6 N.m at 12.0 A peak current. ## Encoder, feedback, and integration constraints The absolute multiturn SinCos Hiperface encoder provides high-resolution position feedback over multiple revolutions — no homing sequence needed on power-up. This encoder type is common on Schneider Lexium drive families; confirm the drive model supports Hiperface protocol before pairing. The motor has no holding brake. Applications requiring position hold at standstill must rely on the drive's dynamic braking or an external brake resistor. The smooth 19 mm shaft with 40 mm length accepts standard shaft couplings; the international standard flange with 100 mm flange size and 95 mm centring collar mounts to common servo gearboxes and machine frames. IP65 protection on both the motor body and shaft bushing means the unit withstands washdown and wet environments — suitable for food, beverage, or outdoor conveyor lines. The rotatable right-angled connector simplifies cable routing in tight panels or along machine frames. ## Electrical parameters for drive tuning and thermal design Maximum radial force Fr is 900 N at 1000 rpm, derating to 530 N at 5000 rpm; maximum axial force Fa is 160 N. These bearing load limits must be checked against the coupling and belt-drive forces in the application. Natural convection cooling means no external fan — the motor relies on its own surface area and mounting plate for heat dissipation; the hot-spot copper temperature is 130 °C.","metaTitle":"Schneider Electric SH31001P02A2100 Servo Motor, 1190 W, IP65","metaDescription":"Schneider Electric SH31001P02A2100 SH3 servo motor, 1190 W continuous power, IP65, absolute multiturn SinCos Hiperface encoder, smooth shaft 19 mm.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31001P02A2100","Length":"6.6 in (168.5 mm)","Inertia":"0.0 kg.cm² of brake 1.4 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 100mm, 1 stack, smooth Shaft, SinCos Multiturn 128, no Brake, angular, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"1250 rpm 115 V single phase 2500 rpm 230 V single phase 5000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"1.4 kg.cm²","Nominal torque":"25.76 lbf.in (2.91 N.m) 115 V single phase 23.37 lbf.in (2.64 N.m) 230 V single phase 20.09 lbf.in (2.27 N.m) 400 V three phase 20.09 lbf.in (2.27 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"0.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1190 W","Mounting Support":"International standard flange","Sizing reference":"SH31001P","Back emf constant":"60 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"9.5 mH","Stator resistance":"3.8 Ohm","Maximum current Irms":"12.0 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1410 W 400 V three phase 1630 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"12.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f75605a332dd94c6859efcbb7ff92087.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31001P02A2100/sh3-servomotor-100mm-1-stack-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What supply voltages does SH31001P02A2100 run on and what performance does each deliver?","answer":"The motor runs on three-phase 400 V (5000 rpm, 2.27 N.m, 1410 W), three-phase 480 V (5000 rpm, 2.27 N.m, 1630 W), single-phase 230 V (2500 rpm, 2.64 N.m, 790 W), and single-phase 115 V (1250 rpm, 2.91 N.m, 410 W) per. The continuous power rating is 1190 W."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001P02A2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001P02A2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}