{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001P02A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001P02A2200","canonicalUrl":"https://aoctrl.com/schneider/SH31001P02A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001P02A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor, SH31001P02A2200, 1190 W continuous power, 5000 rpm at 480 V three-phase, 2.91 Nm nominal torque, absolute multiturn SinCos Hiperface encoder, IP65, smooth shaft 19 mm diameter.","salesMarkdown":"## Speed-torque envelope across supply voltages The SH31001P02A2200: This SH3 frame motor delivers a nominal speed of 5000 rpm at 480 V three-phase, dropping to 2500 rpm at 230 V single-phase and 1250 rpm at 115 V single-phase — the drive supply voltage directly sets the velocity ceiling. Nominal torque varies with supply: 2.91 Nm at 115 V single-phase, 2.64 Nm at 230 V single-phase, and 2.27 Nm at both 400 V and 480 V three-phase. The torque constant is 0.84 Nm/A at 120 °C copper temperature, giving a predictable current-to-torque ratio for the drive tuning. Peak stall torque reaches 9.6 Nm across the 115–480 V three-phase range, while continuous stall torque is 2.94 Nm — the 3.3:1 peak-to-continuous ratio supports aggressive acceleration profiles without oversizing the drive. ## Encoder and feedback — drive pairing constraints The absolute multiturn SinCos Hiperface encoder provides position feedback without a home cycle on power-up — the drive must support the Hiperface protocol. Back EMF constant is 60 V/krpm at 20 °C — the drive's DC bus voltage must accommodate the generated voltage at maximum speed to avoid overvoltage trips during deceleration. ## Mounting and mechanical integration International standard flange with 100 mm flange size and 95 mm centring collar diameter — mounts to standard IEC metric flange patterns. The 3.5 mm centring collar depth aligns the rotor concentricity within 0.1 mm typical. Smooth shaft, 19 mm diameter, 40 mm shaft length — no keyway, so the coupling must transmit torque through a clamping or friction fit. Maximum radial force is 900 N at 1000 rpm, derating to 530 N at 5000 rpm; maximum axial force is 160 N. Electrical connection via straight or rotatable right-angle connector — the rotatable option helps route the cable in tight cabinet layouts without bending the connector body. ## Environmental sealing and cooling IP65 motor body and shaft bushing, IP67 housing per IEC 60034-5 — the motor withstands washdown and dust ingress. The IP67 housing rating exceeds the IP65 body, meaning the connector and rear housing seal are the stronger link. Natural convection cooling — no external fan or coolant required. The 1190 W continuous power rating assumes free air circulation; derate if enclosed in a non-ventilated cavity. ## Electrical parameters for drive tuning Stator resistance 3.8 Ohm and inductance 9.5 mH — these values set the current-loop bandwidth limits and the L/R time constant for the drive's PI tuning. The 4-pole motor design gives a base electrical frequency of 166.7 Hz at 5000 rpm. Continuous stall current 3.5 A, with a 3-second peak of 12.0 A — the drive must supply 12 A for acceleration without tripping on overcurrent. The 12 A peak also sets the minimum drive continuous rating to avoid I²t overload. ## Sourcing and lifecycle — current production No holding brake on this variant — if the application requires a brake for vertical-axis holding or emergency stop, a separate brake motor or external brake resistor circuit must be added.","metaTitle":"Schneider Electric SH31001P02A2200 Servo Motor, 1190 W","metaDescription":"Schneider Electric SH31001P02A2200 SH3 servo motor, 1190 W continuous, 5000 rpm at 480 V three-phase, absolute multiturn SinCos Hiperface encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Length":"6.6 in (168.5 mm)","Encoder Type":"Absolute multiturn SinCos Hiperface","Product Status":"Active","Shaft Diameter":"0.7 in (19 mm)","Shaft End Type":"Smooth shaft","Max Axial Force Fa N":"160 N","Centring Collar Diameter":"3.7 in (95 mm)","Main Product Or Component Type":"Servo motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,778.22","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/305ebb9273e25599d731111d30d80e1f.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31001P02A2200/sh3-servomotor-100mm-1-stack-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31001P02A2200/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001P02A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001P02A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}