{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001P02F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001P02F1200","canonicalUrl":"https://aoctrl.com/schneider/SH31001P02F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001P02F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31001P02F1200, 1190 W continuous power, 9 N·m holding torque, absolute multiturn SinCos Hiperface encoder, IP65/IP67, smooth shaft, three-phase.","salesMarkdown":"## Motor specs that decide the drive match The SH31001P02F1200 is a three-phase servo motor from the SH3 series, delivering 1190 W continuous power. Its nominal speed depends on the supply: 1250 rpm at 115 V single-phase, 2500 rpm at 230 V single-phase, 5000 rpm at 400 V three-phase, and 6000 rpm at 480 V three-phase — so the same motor covers a wide speed range depending on the drive voltage you feed it. Nominal torque also shifts with voltage: 2.91 N·m at 115 V single-phase, 2.64 N·m at 230 V single-phase, and 2.27 N·m at both 400 V and 480 V three-phase. The peak stall torque is 9.6 N·m across the 115–480 V three-phase range, giving you a 4:1 torque margin for acceleration and overload events. ## Encoder, feedback, and environmental protection The absolute multiturn SinCos Hiperface encoder provides position feedback without needing a homing sequence on power-up — the drive knows the shaft angle and number of turns immediately. This saves time on multi-axis machines where each axis would otherwise need to find its reference. IP65 on the motor body and shaft bushing, IP67 on the housing per IEC 60034-5 — the motor withstands washdown and hose-directed water. Natural convection cooling (no fan) means no moving parts to clog or fail, but the thermal limit is 130 °C on the copper winding, so the continuous torque rating assumes free airflow around the frame. The torque constant is 0.84 N·m/A at 120 °C winding temperature — use this to calculate the drive current needed for a given torque demand. The back EMF constant is 60 V/krpm at 20 °C; at higher speeds the back EMF subtracts from the drive's available bus voltage, so check voltage margin if running near 6000 rpm on a 480 V bus. ## Mechanical interface and load limits The motor flange is 100 mm (3.9 in) with a 95 mm centring collar and 3.5 mm collar depth — standard international flange pattern for direct mounting to gearboxes or machine frames. The smooth shaft (19 mm diameter, 40 mm length) requires a clamping-type coupling or hub; no keyway is provided. Maximum radial force is 900 N at 1000 rpm, dropping to 530 N at 5000 rpm — belt or pulley loads must stay within this envelope to avoid bearing damage. Maximum axial force is 160 N, so direct thrust loads (like a lead screw) need a separate thrust bearing. Electrical connection options include both a rotatable right-angle connector and a straight connector — choose the one that fits your cable routing in the cabinet or on the machine frame. The sizing reference is SH31001P — this is the base motor frame; the full order code includes the brake, encoder, connector, and shaft options. No direct pin-compatible alternative exists within the SH3 family; the motor is specified by its full order code for exact mechanical and electrical fit.","metaTitle":"Schneider Electric SH31001P02F1200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31001P02F1200 servo motor with brake, 1190 W continuous power, 9 N·m holding torque, IP65/IP67, absolute encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31001P02F1200","Length":"7.9 in (199.5 mm)","Inertia":"0.618 kg.cm² of brake 1.4 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 100mm, 1 stack, smooth Shaft, SinCos Multiturn 128, Brake, straight, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"1250 rpm 115 V single phase 2500 rpm 230 V single phase 5000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"2.018 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"25.76 lbf.in (2.91 N.m) 115 V single phase 23.37 lbf.in (2.64 N.m) 230 V single phase 20.09 lbf.in (2.27 N.m) 400 V three phase 20.09 lbf.in (2.27 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"0.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1190 W","Mounting Support":"International standard flange","Sizing reference":"SH31001P","Back emf constant":"60 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"9.5 mH","Stator resistance":"3.8 Ohm","Maximum current Irms":"12.0 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1410 W 400 V three phase 1630 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"12.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/2e251f79387194b5f8154406654faf49.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31001P02F1200/sh3-servomotor-100mm-1-stack-smooth-shaft-sincos-multiturn-128-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"What supply voltage and phase does SH31001P02F1200 require?","answer":"The motor is a three-phase design, but its nominal speed and torque vary with the supply voltage. It runs on 115 V single-phase, 230 V single-phase, 400 V three-phase, or 480 V three-phase — the drive determines the actual voltage fed to the motor."},{"question":"What is the holding brake torque on this servo motor?","answer":"The holding brake provides 9 N·m (79.7 lbf·in) of holding torque — sufficient to hold a vertical load without power applied to the motor."},{"question":"What encoder type does SH31001P02F1200 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder. This gives position feedback including the number of shaft turns, so no homing sequence is needed on power-up."},{"question":"What IP rating does this motor have?","answer":"IP65 on the motor body and shaft bushing, IP67 on the housing — all per IEC 60034-5. Suitable for washdown environments and hose-directed water."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001P02F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001P02F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}