{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001P0AA3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001P0AA3000","canonicalUrl":"https://aoctrl.com/schneider/SH31001P0AA3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001P0AA3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31001P0AA3000, 1190 W continuous power, 2.64 N·m nominal torque at 400 V three-phase, 6000 rpm maximum mechanical speed, absolute single-turn Hiperface DSL encoder, smooth shaft, IP65, natural convection cooling.","salesMarkdown":"## Speed-torque envelope across supply voltages The SH31001P0AA3000 delivers three distinct operating points depending on the supply: 2500 rpm nominal at 230 V single-phase, 5000 rpm at 400 V three-phase, and 6000 rpm at 480 V three-phase. Nominal torque follows the same pattern — 2.64 N·m at 230 V, dropping to 2.27 N·m at both 400 V and 480 V three-phase. The continuous power rating is 690 W on single-phase and 1190 W on three-phase supplies. Peak stall torque is 9.6 N·m across the 115–480 V three-phase range, with a continuous stall torque of 2.94 N·m and a continuous stall current of 3.5 A. The maximum current Irms is 12 A. ## Encoder feedback and mechanical interface Feedback comes from an absolute single-turn Hiperface DSL encoder — a digital serial interface that reports position on power-up without a homing cycle, provided the travel stays within one revolution. The motor has 4 poles and a back EMF constant of 60 V/krpm at 20 °C. The shaft is smooth, 19 mm diameter by 40 mm long, with no keyway — the coupling must grip the shaft directly. The motor flange is 100 mm square with a 95 mm centring collar and 9.0 mm mounting holes. Overall body length is 168.5 mm. There is no holding brake. For vertical-axis or power-off hold applications, an external brake or counterbalance is required. ## Thermal and environmental ratings The motor body carries IP65 protection per IEC 60034-5, but the shaft bushing without a shaft seal ring is only IP54 — washdown environments need the optional shaft seal to prevent moisture ingress along the shaft. Maximum radial force is 1930 N at 1000 rpm, derating to 1340 N at 3000 rpm; maximum axial force is 300 N. ## Electrical parameters and connection Stator resistance is 3.8 Ω and stator inductance is 19 mH. The torque constant is 0.84 N·m/A at 120 °C copper temperature. The electrical connection uses a quicklock straight connector — no separate cable gland required at the motor end.","metaTitle":"Schneider Electric SH31001P0AA3000 Servo Motor, 1190 W","metaDescription":"Schneider Electric SH31001P0AA3000 SH3 servo motor, 1190 W continuous power, 2.64 N·m nominal torque at 400 V three-phase, 6000 rpm max speed, absolute","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.6 in (168.5 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"2500 rpm 230 V single phase 5000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"1.40 kg.cm²","Nominal torque":"23.37 lbf.in (2.64 N.m) 230 V single phase 20.09 lbf.in (2.27 N.m) 400 V three phase 20.09 lbf.in (2.27 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"0.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1190 W","Mounting Support":"International standard flange","Sizing reference":"SH31001P","Back emf constant":"60 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"19 mH","Stator resistance":"3.8 Ohm","Maximum current Irms":"12 A","Nominal output power":"690 W 230 V single phase 1190 W 400 V three phase 1190 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"300 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"1930 N 1000 rpm 1530 N 2000 rpm 1340 N 3000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a617529c3d436a370762741c067d07cd.pdf","sourceUrl":"https://www.se.com/be/en/product/SH31001P0AA3000/sh3-servomotor-100mm-1-stack-smooth-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-straight-m23-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31001P0AA3000/alternatives.json"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to SH31001P0AA3000 in this servo motor family?","answer":"The SH3 series includes other frame sizes and power ratings, but a form-fit-function replacement would require matching the 100 mm flange, 19 mm smooth shaft, Hiperface DSL encoder, and the specific torque-speed envelope — differences in winding resistance, inductance, and rotor inertia change the servo drive tuning parameters. Cross-reference against the Schneider sizing tool output for the SH31001P sizing reference."},{"question":"What is SH31001P0AA3000's listed phase?","answer":"Three-phase. The motor is designed for three-phase supply, though it can run at reduced power on single-phase 230 V."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001P0AA3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001P0AA3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}