{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001P0BA3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001P0BA3000","canonicalUrl":"https://aoctrl.com/schneider/SH31001P0BA3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001P0BA3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31001P, Three phase, 1190 W, 2.64 Nm nominal torque, 19 mm smooth shaft, absolute multiturn Hiperface DSL encoder, IP65, without holding brake.","salesMarkdown":"## Power and torque across supply voltages The SH31001P0BA3000: Rated for three-phase supply, the motor delivers 1190 W continuous output on 400 V or 480 V three-phase, and 690 W on 230 V single-phase. Nominal torque is 2.64 Nm at 230 V single-phase, and 2.27 Nm at both 400 V and 480 V three-phase — the torque drop at higher voltage is typical of the winding design. Peak stall torque reaches 9.6 Nm across the 115-480 V three-phase range, giving a 3.5× overload margin for acceleration and deceleration transients. Continuous stall torque is 2.94 Nm on three-phase supply, with a continuous stall current of 3.5 A — this is the thermal limit for sustained holding torque. ## Encoder feedback and shaft details Equipped with an absolute multiturn Hiperface DSL encoder — single-cable feedback that carries both position data and power over two wires, reducing cabling complexity and eliminating battery-backed multiturn memory. Smooth shaft, 19 mm diameter, 40 mm shaft length — no keyway, so the coupling or pulley must clamp directly onto the shaft. The 300 N maximum axial force and radial force limits (1340 N at 3000 rpm, 1930 N at 1000 rpm) govern bearing life under belt or direct-drive loads. ## Mounting and environmental protection International standard flange, 100 mm flange size, 95 mm centring collar — mounts to standard servo motor flanges without adapter plates. IP65-rated motor body per IEC 60034-5, with IP54 at the shaft bushing when the shaft seal ring is omitted — suitable for washdown zones where the shaft exit is protected from direct spray. Electrical connection via a rotatable right-angle connector or a quicklock straight connector — both options allow the cable exit to be oriented away from obstructions in tight panel layouts. ## No holding brake — plan for vertical loads This variant ships without a holding brake — for vertical-axis or Z-axis applications, an external brake or a motor with an integrated brake must be specified to prevent load drift when the drive is disabled.","metaTitle":"Schneider SH31001P0BA3000 Servo Motor, 1190 W, 2.64 Nm","metaDescription":"Schneider Electric SH31001P0BA3000 servo motor, 1190 W, 2.64 Nm nominal torque, absolute multiturn Hiperface DSL encoder. Active production — quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.6 in (168.5 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"2500 rpm 230 V single phase 5000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"1.40 kg.cm²","Nominal torque":"23.37 lbf.in (2.64 N.m) 230 V single phase 20.09 lbf.in (2.27 N.m) 400 V three phase 20.09 lbf.in (2.27 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"0.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1190 W","Mounting Support":"International standard flange","Sizing reference":"SH31001P","Back emf constant":"60 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"19 mH","Stator resistance":"3.8 Ohm","Maximum current Irms":"12 A","Nominal output power":"690 W 230 V single phase 1190 W 400 V three phase 1190 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"300 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"1340 N 3000 rpm 1930 N 1000 rpm 1530 N 2000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/42c17d31d837342a922eafdf9ecc64de.pdf","sourceUrl":"https://www.se.com/be/en/product/SH31001P0BA3000/sh3-servomotor-100mm-1-stack-smooth-shaft-multiturn-dsl-18bit-no-brake-onemotorcable-straight-m23-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31001P0BA3000/alternatives.json"},"ai":{"faq":[{"question":"What is the nominal torque of SH31001P0BA3000 at 400 V three-phase?","answer":"Nominal torque is 2.27 Nm at 400 V three-phase, with a continuous output power of 1190 W."},{"question":"What encoder type does SH31001P0BA3000 use?","answer":"It uses an absolute multiturn Hiperface DSL encoder — single-cable feedback with no battery backup needed for multiturn position."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001P0BA3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001P0BA3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}