{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001P11F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001P11F1200","canonicalUrl":"https://aoctrl.com/schneider/SH31001P11F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001P11F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31001P11F1200, three-phase, 1190 W continuous power, 9 N.m holding torque, IP65/IP67, absolute single-turn SinCos Hiperface encoder, 100 mm flange.","salesMarkdown":"## Supply-voltage-dependent performance map The SH31001P11F1200 is a three-phase servo motor from the SH3 series, but its speed and torque curves shift with the supply. On 400 V three-phase it delivers 5000 rpm nominal speed and 1410 W output; on 480 V three-phase it reaches 6000 rpm and 1630 W. On single-phase 115 V or 230 V the nominal speed drops to 1250 rpm or 2500 rpm respectively, and nominal torque ranges from 25.76 lbf.in (115 V) down to 20.09 lbf.in (400/480 V). This means the same motor body covers a wide application range — but the drive tuning and power wiring must match the actual line voltage, not just the motor nameplate. ## Sealing and mechanical limits IP65 on the motor body and shaft bushing, IP67 on the housing — conforming to IEC 60034-5. This means the motor handles washdown without a secondary cover, but the connector must be mated correctly to maintain the seal. Maximum radial force at the shaft is 900 N at 1000 rpm, derating to 530 N at 5000 rpm; maximum axial force is 160 N. The shaft is 19 mm diameter with a parallel key, 40 mm shaft length, and the flange is the international standard 100 mm size with a 3.5 mm centring collar depth. ## Thermal and electrical parameters for drive tuning Stator resistance is 3.8 Ohm, stator inductance 9.5 mH — these set the electrical time constant and influence the current-loop gains in the servo drive. The torque constant is 0.84 N.m/A at 120 °C copper temperature; the back-EMF constant is 60 V/krpm at 20 °C. Continuous stall torque is 2.94 N.m across the three-phase supply range; peak stall torque is 9.6 N.m. The maximum continuous current Irms is 12.0 A, with a 3-second peak of the same 12.0 A — so the peak-to-continuous ratio is modest, meaning short overloads are limited. Cooling is natural convection, so the motor relies on its own surface area and the machine frame for heat rejection.","metaTitle":"Schneider Electric SH31001P11F1200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31001P11F1200 SH3 servo motor with holding brake. Three-phase, 1190 W continuous power, IP65/IP67, absolute single-turn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31001P11F1200","Length":"7.9 in (199.5 mm)","Inertia":"0.618 kg.cm² of brake 1.4 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 100mm, 1 stack, keyed Shaft, SinCos Singleturn 128, Brake, straight, IP65/67","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"1250 rpm 115 V single phase 2500 rpm 230 V single phase 5000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"2.018 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"25.76 lbf.in (2.91 N.m) 115 V single phase 23.37 lbf.in (2.64 N.m) 230 V single phase 20.09 lbf.in (2.27 N.m) 400 V three phase 20.09 lbf.in (2.27 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"0.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1190 W","Mounting Support":"International standard flange","Sizing reference":"SH31001P","Back emf constant":"60 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"9.5 mH","Stator resistance":"3.8 Ohm","Maximum current Irms":"12.0 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1410 W 400 V three phase 1630 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"12.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0421d809e8f4ec0cb7cf428560129499.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31001P11F1200/sh3-servomotor-100mm-1-stack-keyed-shaft-sincos-singleturn-128-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"What is the holding torque of the brake on SH31001P11F1200?","answer":"The holding brake delivers 9 N.m (79.7 lbf.in) of holding torque. The brake adds 0.618 kg.cm² of inertia to the motor's 2.018 kg.cm² rotor inertia."},{"question":"What encoder type does this motor use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. No homing sequence is needed on power-up — the position is known immediately."},{"question":"What IP rating does the SH31001P11F1200 have?","answer":"IP65 on the motor body and shaft bushing, IP67 on the housing, all conforming to IEC 60034-5. Suitable for washdown environments when the connector is properly mated."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001P11F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001P11F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}