{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001P12A2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001P12A2100","canonicalUrl":"https://aoctrl.com/schneider/SH31001P12A2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001P12A2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, order code SH31001P12A2100, 1190 W continuous power, IP65, absolute multiturn SinCos Hiperface encoder, 100 mm flange, natural convection cooling.","salesMarkdown":"## What this SH31001P12A2100 servo motor delivers Speed also depends on the supply — 1250 rpm at 115 V single phase, 2500 rpm at 230 V single phase, 5000 rpm at 400 V three phase, and 6000 rpm at 480 V three phase — so the same motor frame covers a wide application range by simply changing the drive voltage. The IP65 rating on both the motor body and the shaft bushing (per IEC 60034-5) means this motor handles washdown environments without additional enclosure protection — suitable for food processing or wet machining lines where coolant spray is constant. ## Encoder and feedback — absolute multitrack Fitted with an absolute multiturn SinCos Hiperface encoder, the SH31001P12A2100 retains position data through power cycles — no homing routine needed on restart, which cuts commissioning time on multi-axis gantries or rotary tables. The Hiperface protocol is a common interface across Schneider and third-party drives; verify the drive-side compatibility before wiring, as the SinCos analog track requires a specific input card on some controller families. ## Mounting dimensions and mechanical interface The motor uses a 100 mm international standard flange (3.9 in) with a 95 mm centring collar (3.7 in) and 3.5 mm collar depth — this bolts directly to standard NEMA 100 mm gearboxes and mounting brackets without adapter plates. Shaft is 19 mm diameter with a 40 mm length and a parallel key (6 mm key width), a common metric interface for couplings and pulleys in European-designed machinery. Overall body length is 168.5 mm (6.6 in); the rotatable right-angled connector allows the cable exit to be oriented in four positions, easing routing in tight control cabinets. ## Mechanical load limits — radial and axial forces Maximum radial force Fr is 900 N at 1000 rpm, derating to 530 N at 5000 rpm — this is the load the front bearing can sustain at the shaft centre; overhung loads from belt drives or heavy couplings must stay below this curve to avoid premature bearing failure. Maximum axial force Fa is 160 N — relevant for helical-gear loads or fan-mount applications where thrust pushes along the shaft axis.","metaTitle":"Schneider Electric SH31001P12A2100 Servo Motor, 1190 W, IP65","metaDescription":"Schneider Electric SH31001P12A2100 SH3 servo motor, 1190 W continuous, IP65, absolute multiturn encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.6 in (168.5 mm)","Inertia":"0.0 kg.cm² of brake 1.4 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"1250 rpm 115 V single phase 2500 rpm 230 V single phase 5000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"1.4 kg.cm²","Nominal torque":"25.76 lbf.in (2.91 N.m) 115 V single phase 23.37 lbf.in (2.64 N.m) 230 V single phase 20.09 lbf.in (2.27 N.m) 400 V three phase 20.09 lbf.in (2.27 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"0.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1190 W","Mounting Support":"International standard flange","Sizing reference":"SH31001P","Back emf constant":"60 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"9.5 mH","Stator resistance":"3.8 Ohm","Maximum current Irms":"12.0 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1410 W 400 V three phase 1630 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"12.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7c67da181f15b7505e4859d92fd803f1.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31001P12A2100/sh3-servomotor-100mm-1-stack-keyed-shaft-sincos-multiturn-128-no-brake-angular-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31001P12A2100/alternatives.json"},"ai":{"faq":[{"question":"What is the IP rating and what does it mean for installation?","answer":"IP65 per IEC 60034-5 on both the motor body and the shaft bushing. This means the motor is dust-tight and protected against water jets from any direction — it can be installed in washdown zones without a secondary enclosure."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001P12A2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001P12A2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}