{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001P12F1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001P12F1100","canonicalUrl":"https://aoctrl.com/schneider/SH31001P12F1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001P12F1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor with brake, SH31001P12F1100, 5000 rpm at 400 V three-phase, 2.94 N·m continuous stall torque, IP65, absolute multiturn SinCos Hiperface encoder.","salesMarkdown":"## Speed-torque envelope across supply voltages The SH31001P12F1100: This SH3-frame motor delivers 5000 rpm nominal at 400 V three-phase and 6000 rpm at 480 V three-phase. On single-phase supplies, nominal speed drops to 1250 rpm at 115 V and 2500 rpm at 230 V — the voltage-dependent speed profile means the application's available line voltage directly sets the top-end velocity. Nominal torque also shifts with supply: 2.91 N·m at 115 V single-phase, 2.64 N·m at 230 V single-phase, and 2.27 N·m at both 400 V and 480 V three-phase. The continuous stall torque is 2.94 N·m across the 115–480 V three-phase range, giving a consistent holding capability regardless of the line feed. Continuous output power ranges from 410 W (115 V single-phase) up to 1630 W (480 V three-phase), with 1410 W at 400 V three-phase. The 1190 W continuous power figure sits between the single- and three-phase ratings, reflecting the motor's thermal limit under natural convection cooling. ## Brake, encoder, and mechanical integration Feedback comes from an absolute multiturn SinCos Hiperface encoder — no homing sequence needed on power-up; the drive reads the absolute position directly. This saves cycle time on multi-axis machines and eliminates the need for a home sensor. The motor mounts on an international standard flange with a 100 mm (3.9 in) flange size. The shaft is 19 mm diameter with a parallel key, 40 mm shaft length, and 6 mm key width. IP65 protection on both the motor body and shaft bushing means the unit handles washdown environments — suitable for food-and-bev or machining coolant exposure.","metaTitle":"Schneider Electric SH31001P12F1100 Servo Motor with Brake","metaDescription":"Schneider Electric SH31001P12F1100 SH3 servo motor with brake. 5000 rpm at 400 V three-phase, 2.94 N·m continuous stall torque, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31001P12F1100","Length":"7.9 in (199.5 mm)","Inertia":"0.618 kg.cm² of brake 1.4 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 100mm, 1 stack, keyed Shaft, SinCos Multiturn 128, Brake, straight, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"1250 rpm 115 V single phase 2500 rpm 230 V single phase 5000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"2.018 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"25.76 lbf.in (2.91 N.m) 115 V single phase 23.37 lbf.in (2.64 N.m) 230 V single phase 20.09 lbf.in (2.27 N.m) 400 V three phase 20.09 lbf.in (2.27 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"0.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1190 W","Mounting Support":"International standard flange","Sizing reference":"SH31001P","Back emf constant":"60 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"9.5 mH","Stator resistance":"3.8 Ohm","Maximum current Irms":"12.0 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1410 W 400 V three phase 1630 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"12.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d375881f369a86f5fd4a6b0797c493a8.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31001P12F1100/sh3-servomotor-100mm-1-stack-keyed-shaft-sincos-multiturn-128-brake-straight-ip65-65/"},"ai":{"faq":[{"question":"What is SH31001P12F1100's listed phase and length?","answer":"The motor is three-phase. Overall length is 7.9 in (199.5 mm)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001P12F1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001P12F1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}