{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001P12F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001P12F1200","canonicalUrl":"https://aoctrl.com/schneider/SH31001P12F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001P12F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31001P12F1200, 1190 W continuous power, 5000 rpm at 400 V three-phase, 9 N.m holding brake, absolute multiturn SinCos Hiperface encoder, IP65/IP67, 100 mm flange.","salesMarkdown":"## Speed-torque envelope across supply voltages The SH31001P12F1200: This SH3 frame motor delivers 5000 rpm at 400 V three-phase and 6000 rpm at 480 V three-phase — the nominal torque at those voltages is 2.27 N.m, with continuous stall torque of 2.94 N.m across the 115...480 V three-phase range. On single-phase supplies the speed ceiling drops: 1250 rpm at 115 V and 2500 rpm at 230 V, with nominal torque of 2.91 N.m and 2.64 N.m respectively. The continuous output power follows the same curve — 1410 W at 400 V three-phase, 1630 W at 480 V three-phase, versus 410 W at 115 V single-phase. The 1190 W continuous power rating and 12.0 A maximum Irms define the thermal envelope under natural convection cooling — no fan is assumed in the rating, so the drive's current limit must be set to the motor's continuous stall torque of 2.94 N.m for sustained low-speed positioning. ## Holding brake and encoder — axis hold and position feedback The integrated holding brake delivers 9 N.m holding torque — enough to hold a vertical axis at rest without servo current draw. The brake is factory-fitted and tested; the drive parameter set must include the brake release and engage times to avoid the motor fighting the brake during start/stop transitions. Feedback comes from an absolute multiturn SinCos Hiperface encoder — the drive reads absolute position on power-up without a homing cycle, as long as the encoder battery backup is maintained. The multiturn count tracks position across power cycles, which matters for applications where the axis must not lose its reference after a power loss. ## Mounting, sealing, and mechanical interface The motor flange is 100 mm (3.9 in) with a 0.4 in (9.0 mm) mounting hole diameter and 0.1 in (3.5 mm) centring collar depth — standard IEC metric frame that bolts directly to the matching gearbox or machine interface without an adapter plate. The shaft is 19 mm diameter with a parallel key, 40 mm shaft length, and 6 mm key width. IP65 on the motor body and shaft bushing, IP67 on the housing per IEC 60034-5 — the shaft bushing seal is the wet-end limit in washdown zones; the housing itself withstands temporary immersion. The rotatable right-angled connector or straight connector option lets the cable exit direction be specified at order time, not field-swapped. Maximum radial force derates with speed: 900 N at 1000 rpm, 720 N at 2000 rpm, 630 N at 3000 rpm, 570 N at 4000 rpm, 530 N at 5000 rpm. Maximum axial force is 160 N. The bearing life calculation must use the radial force at the operating speed, not the static maximum. ## Electrical parameters for drive tuning Stator resistance is 3.8 Ohm and stator inductance is 9.5 mH — these values set the electrical time constant and feed into the drive's current loop PI gains. The torque constant is 0.84 N.m/A at 120 °C copper temperature, and the back EMF constant is 60 V/krpm at 20 °C. The drive's velocity loop feed-forward terms are tuned around these constants for the target speed range.","metaTitle":"Schneider Electric SH31001P12F1200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31001P12F1200 SH3 servo motor with holding brake. 1190 W continuous power, 5000 rpm at 400 V three-phase.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31001P12F1200","Length":"7.9 in (199.5 mm)","Inertia":"0.618 kg.cm² of brake 1.4 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 100mm, 1 stack, keyed Shaft, SinCos Multiturn 128, Brake, straight, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"1250 rpm 115 V single phase 2500 rpm 230 V single phase 5000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"2.018 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"25.76 lbf.in (2.91 N.m) 115 V single phase 23.37 lbf.in (2.64 N.m) 230 V single phase 20.09 lbf.in (2.27 N.m) 400 V three phase 20.09 lbf.in (2.27 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"0.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1190 W","Mounting Support":"International standard flange","Sizing reference":"SH31001P","Back emf constant":"60 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"9.5 mH","Stator resistance":"3.8 Ohm","Maximum current Irms":"12.0 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1410 W 400 V three phase 1630 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"12.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a08af0fbf5003fb58a07471fd5b4a037.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH31001P12F1200/sh3-servomotor-100mm-1-stack-keyed-shaft-sincos-multiturn-128-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"What compliance documentation does Schneider Electric provide for SH31001P12F1200?","answer":"The motor carries IP65/IP67 ratings per IEC 60034-5. No specific RoHS, REACH, UL, or CE declarations are listed in the available spec record — these are typically included in the manufacturer's declaration pack supplied with the motor."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001P12F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001P12F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}