{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001P12F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001P12F2200","canonicalUrl":"https://aoctrl.com/schneider/SH31001P12F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001P12F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31001P12F2200, three-phase, 1190 W continuous power, 9 N.m holding torque, IP65/IP67, absolute multiturn SinCos Hiperface encoder, 100 mm flange.","salesMarkdown":"## Three-phase servo with integrated holding brake The SH31001P12F2200 is a three-phase servo motor from the Schneider Electric SH3 series, fitted with a holding brake and an absolute multiturn SinCos Hiperface encoder. It delivers 1190 W continuous power from a 100 mm flange frame. The integrated holding brake provides 9 N.m holding torque, which keeps the load locked in position when the drive is disabled — essential for vertical-axis applications where the load must not drift under gravity. ## Speed and torque across supply configurations Nominal speed depends on the supply: 1250 rpm on 115 V single-phase, 2500 rpm on 230 V single-phase, 5000 rpm on 400 V three-phase, and 6000 rpm on 480 V three-phase. The nominal torque also shifts — 2.91 N.m at 115 V single-phase, 2.64 N.m at 230 V single-phase, and 2.27 N.m on both 400 V and 480 V three-phase supplies. Peak stall torque reaches 9.6 N.m across the 115–480 V three-phase range, giving the motor headroom for acceleration and deceleration transients beyond the continuous rating. Continuous stall torque is 2.94 N.m on three-phase supplies, and the torque constant is 0.84 N.m/A at 120 °C copper temperature — useful for sizing the drive's current loop. ## Sealing and environmental protection The motor body carries IP65 protection per IEC 60034-5, the shaft bushing is also IP65, and the housing is rated IP67. This means the motor withstands washdown and temporary submersion — suitable for food-and-beverage lines or wet machining environments where coolant spray is present. Cooling is by natural convection, so the motor relies on its own surface area and ambient airflow rather than a fan. Mounting on the international standard flange (100 mm) with four 9 mm holes and a 3.5 mm centring collar depth ensures repeatable alignment to the driven load. ## Mechanical interface and load limits The shaft is 19 mm diameter with a 40 mm length and a parallel key (6 mm key width). Maximum radial force at the shaft nose is 900 N at 1000 rpm, derating to 530 N at 5000 rpm. Maximum axial force is 160 N. These limits govern bearing life when coupling to belts, gears, or direct loads. The sizing reference SH31001P ties the motor to the SH3 family's parametric selection tool.","metaTitle":"Schneider Electric SH31001P12F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31001P12F2200 servo motor with brake, 1190 W continuous power, 9 N.m holding torque, IP65/IP67, absolute multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31001P12F2200","Length":"7.9 in (199.5 mm)","Inertia":"0.618 kg.cm² of brake 1.4 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 100mm, 1 stack, keyed Shaft, SinCos Multiturn 128, Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"1250 rpm 115 V single phase 2500 rpm 230 V single phase 5000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"2.018 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"25.76 lbf.in (2.91 N.m) 115 V single phase 23.37 lbf.in (2.64 N.m) 230 V single phase 20.09 lbf.in (2.27 N.m) 400 V three phase 20.09 lbf.in (2.27 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"0.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1190 W","Mounting Support":"International standard flange","Sizing reference":"SH31001P","Back emf constant":"60 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"9.5 mH","Stator resistance":"3.8 Ohm","Maximum current Irms":"12.0 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1410 W 400 V three phase 1630 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"12.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,143.80","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c70ad40b12a302ee51b2aadb2efec842.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31001P12F2200/sh3-servomotor-100mm-1-stack-keyed-shaft-sincos-multiturn-128-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What encoder type does the SH31001P12F2200 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder, which provides position feedback without needing a homing cycle after power loss — the absolute position is retained across power cycles."},{"question":"What is the holding brake torque on this servo motor?","answer":"The integrated holding brake delivers 9 N.m holding torque, sufficient to lock vertical-axis loads in position when the drive is disabled."},{"question":"What IP rating does the SH31001P12F2200 carry?","answer":"The motor body and shaft bushing are IP65, and the housing is IP67 per IEC 60034-5 — suitable for washdown environments and temporary immersion."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001P12F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001P12F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}