{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001P1AA3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001P1AA3000","canonicalUrl":"https://aoctrl.com/schneider/SH31001P1AA3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001P1AA3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31001P1AA3000, 1190 W continuous power, 2.64 Nm nominal torque, 2500-6000 rpm speed range, absolute single-turn Hiperface DSL encoder, IP65, without holding brake.","salesMarkdown":"## 100 mm flange, 168.5 mm body — SH3 frame dimensions The SH31001P1AA3000 is a 100 mm flange-size servo motor (3.9 in) with an international standard flange mounting pattern. The body length is 168.5 mm (6.6 in), and the shaft measures 19 mm diameter by 40 mm long with a parallel key and 6 mm keyway. Centring collar diameter is 95 mm with a 3.5 mm depth; the four mounting holes are 9.0 mm diameter on the flange face. This is the standard SH3 frame envelope — it fits the same bolt pattern as other SH3 motors of this flange class. ## Speed and torque — voltage-dependent curves Nominal speed is 2500 rpm on 230 V single-phase supply, 5000 rpm on 400 V three-phase, and 6000 rpm on 480 V three-phase. The maximum mechanical speed is 6000 rpm regardless of supply voltage. Nominal torque is 2.64 N·m (23.37 lbf·in) at 230 V single phase, and 2.27 N·m (20.09 lbf·in) at both 400 V and 480 V three phase. Continuous stall torque is 2.94 N·m across the 115–480 V three-phase range, with a continuous stall current of 3.5 A. Peak stall torque reaches 9.6 N·m (85.0 lbf·in) on 115–480 V three-phase supply. The torque constant is 0.84 N·m/A at 120 °C copper temperature, and the back-EMF constant is 60 V/krpm at 20 °C. ## 1190 W continuous — natural convection cooling Continuous output power is 1190 W on 400 V or 480 V three-phase supply, and 690 W on 230 V single phase. The motor is cooled by natural convection — no external fan or forced airflow required for the rated duty. ## Absolute single-turn Hiperface DSL — no holding brake The encoder is an absolute single-turn Hiperface DSL type — a digital serial-link feedback protocol that carries position and temperature data over a single cable pair. No battery backup is needed for single-turn absolute position on power-up. This variant is supplied without a holding brake. If the application requires a brake to hold the load at standstill (vertical axis, gravity loads), a separate brake or a braked motor variant must be selected. The electrical connection uses a straight quicklock connector. ## IP65 motor body — IP54 at the shaft bushing The motor housing is rated IP65 per IEC 60034-5, suitable for washdown environments and dust ingress protection. The shaft bushing without the shaft seal ring is rated IP54 — the sealing drops one class at the rotating shaft exit. Maximum radial force is 1930 N at 1000 rpm, 1530 N at 2000 rpm, and 1340 N at 3000 rpm. Maximum axial force is 300 N. These limits govern belt-drive or direct-coupling applications — exceeding them shortens bearing life.","metaTitle":"Schneider Electric SH31001P1AA3000 Servo Motor, 1190 W","metaDescription":"Schneider Electric SH31001P1AA3000 SH3 servo motor, 1190 W continuous power, 2.64 Nm torque at 230 V, 2.27 Nm at 400/480 V.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.6 in (168.5 mm)","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"2500 rpm 230 V single phase 5000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"1.40 kg.cm²","Nominal torque":"23.37 lbf.in (2.64 N.m) 230 V single phase 20.09 lbf.in (2.27 N.m) 400 V three phase 20.09 lbf.in (2.27 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"0.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1190 W","Mounting Support":"International standard flange","Sizing reference":"SH31001P","Back emf constant":"60 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"19 mH","Stator resistance":"3.8 Ohm","Maximum current Irms":"12 A","Nominal output power":"690 W 230 V single phase 1190 W 400 V three phase 1190 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"300 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"1340 N 3000 rpm 1930 N 1000 rpm 1530 N 2000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0c5c48221b5d3292c0c8ce951752537b.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31001P1AA3000/sh3-servomotor-100mm-1-stack-keyed-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-straight-m23-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31001P1AA3000/alternatives.json"},"ai":{"faq":[{"question":"What is the encoder type on SH31001P1AA3000?","answer":"It uses an absolute single-turn Hiperface DSL encoder. This is a digital serial-link protocol that transmits position and temperature data over a single cable pair, with no battery required for single-turn absolute position retention."},{"question":"Does SH31001P1AA3000 include a holding brake?","answer":"No, this variant is supplied without a holding brake. For vertical-axis or gravity-loaded applications that require a brake at standstill, a separate brake or a braked motor variant must be selected."},{"question":"What is the IP rating of SH31001P1AA3000?","answer":"The motor housing is IP65 per IEC 60034-5. The shaft bushing without the shaft seal ring is rated IP54 — the sealing is reduced at the rotating shaft exit."},{"question":"How is SH31001P1AA3000 quoted for volume purchases?","answer":"Single-unit and volume inquiries are handled per RFQ."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001P1AA3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001P1AA3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}