{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001P1AA3100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001P1AA3100","canonicalUrl":"https://aoctrl.com/schneider/SH31001P1AA3100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001P1AA3100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH31001P1AA3100 SH3 servo motor, three-phase, 1190 W continuous power, 2.64 Nm nominal torque, 6000 rpm max mechanical speed, IP65, absolute single-turn Hiperface DSL encoder, without holding brake.","salesMarkdown":"## Motor ratings across supply configurations The SH31001P1AA3100 delivers 1190 W continuous power on three-phase 400 V or 480 V supply, dropping to 690 W on 230 V single-phase input. Nominal speed reaches 2500 rpm on 230 V single-phase, 5000 rpm on 400 V three-phase, and 6000 rpm on 480 V three-phase — the 6000 rpm ceiling also matches the maximum mechanical speed limit. Nominal torque is 2.64 Nm on 230 V single-phase and 2.27 Nm on either 400 V or 480 V three-phase supply. ## Encoder, feedback, and control interface Fitted with an absolute single-turn Hiperface DSL encoder — a digital serial interface that carries position and temperature data over a single cable pair, simplifying the feedback wiring compared to incremental or multi-cable resolver systems. The back EMF constant is 60 V/krpm at 20 °C, and the torque constant is 0.84 Nm/A at 120 °C hot copper — both values needed for drive tuning and thermal limit calculations. ## Mechanical integration and environmental sealing Mounts on an international standard flange with a 100 mm flange size, 95 mm centring collar, and 9.0 mm mounting holes — fits the common IEC frame pattern for direct coupling to gearboxes or linear actuators. IP65 rating applies to both the motor body and the shaft bushing per IEC 60034-5, so the unit withstands washdown and dust ingress without an additional cover — suitable for food processing or wet machining environments. Electrical connection uses a rotatable right-angled connector or a quicklock straight connector — the rotatable option helps route the cable in tight panel or machine-frame corners. ## Torque capability and thermal limits Continuous stall torque is 2.94 Nm across the 115–480 V three-phase range, with a continuous stall current of 3.5 A — this is the torque the motor can hold indefinitely at standstill without overheating. Peak stall torque reaches 9.6 Nm on three-phase supply — roughly 3.3× the continuous rating — for acceleration or overload transients, limited by the 12 A maximum RMS current. Cooling is natural convection only — no external fan or forced air, so the duty cycle and ambient temperature must stay within the natural thermal envelope defined by the 130 °C hot copper limit.","metaTitle":"Schneider Electric SH31001P1AA3100 Servo Motor, 1190 W","metaDescription":"Schneider Electric SH31001P1AA3100 SH3 servo motor, 1190 W continuous power, 2.64 Nm torque, 6000 rpm max, IP65, absolute single-turn Hiperface DSL encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.6 in (168.5 mm)","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"2500 rpm 230 V single phase 5000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"1.40 kg.cm²","Nominal torque":"23.37 lbf.in (2.64 N.m) 230 V single phase 20.09 lbf.in (2.27 N.m) 400 V three phase 20.09 lbf.in (2.27 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"0.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1190 W","Mounting Support":"International standard flange","Sizing reference":"SH31001P","Back emf constant":"60 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"19 mH","Stator resistance":"3.8 Ohm","Maximum current Irms":"12 A","Nominal output power":"690 W 230 V single phase 1190 W 400 V three phase 1190 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"300 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"1930 N 1000 rpm 1530 N 2000 rpm 1340 N 3000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a9389a0b7eb9ea66843395604fb16d4a.pdf","sourceUrl":"https://www.se.com/be/en/product/SH31001P1AA3100/sh3-servomotor-100mm-1-stack-keyed-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-straight-m23-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31001P1AA3100/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation does Schneider Electric provide for SH31001P1AA3100?","answer":"The evidence does not list specific compliance documents such as RoHS, REACH, UL, or IEC certificates. The IP65 rating is confirmed per IEC 60034-5."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001P1AA3100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001P1AA3100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}