{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001P1BA3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001P1BA3000","canonicalUrl":"https://aoctrl.com/schneider/SH31001P1BA3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001P1BA3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31001P1BA3000, 1190 W continuous power, 6000 rpm, absolute multiturn Hiperface DSL encoder, IP65, without brake.","salesMarkdown":"## Motor specs that drive the selection The SH31001P1BA3000 is a Schneider Electric SH3 series servo motor rated for 1190 W continuous output power on three-phase 400 V or 480 V supply, with a nominal torque of 2.27 N.m at those voltages. It spins to 6000 rpm mechanical max, with nominal speeds of 2500 rpm on 230 V single-phase, 5000 rpm on 400 V three-phase, and 6000 rpm on 480 V three-phase — the speed range depends on the line voltage you feed it. The encoder is an absolute multiturn Hiperface DSL, which means single-cable feedback for both power and position data — no separate encoder cable needed, saving a conductor in the cable chain. This variant ships without a holding brake, so if the application requires Z-axis or vertical-load holding at power-off, you will need to add an external brake or specify the braked version. ## Mounting and environmental fit The motor uses an international standard flange with a 100 mm (3.9 in) flange size and a 95 mm centring collar, common for direct mounting to gearboxes or machine frames without adapter plates. IP65 protection on the motor body means it handles washdown and dust ingress on the housing, but the shaft bushing drops to IP54 without the shaft seal ring — budget a shaft seal if the line sees direct spray at the output shaft. Cooling is natural convection, so no fan or forced air is needed — but derate the continuous torque if the motor is enclosed in a tight cabinet or running at low speed for extended periods. The electrical connection uses a quicklock straight connector, which simplifies panel wiring compared to a right-angle plug — the cable exits straight out the back of the motor, useful for tight radial clearance. ## Electrical parameters for the drive tuning engineer Stator resistance is 3.8 Ohm and inductance is 19 mH — these values feed the autotuning routine in the drive for current-loop gains and field-weakening thresholds. The torque constant is 0.84 N.m/A at 120 °C copper temperature, and the back EMF constant is 60 V/krpm at 20 °C — use these to calculate the required drive DC bus voltage for a given speed and load. Continuous stall current is 3.5 A, with a maximum RMS current of 12 A — the drive's peak current capability should cover the 12 A figure for acceleration and deceleration transients. No official successor or cross-reference is recorded for this order code; the SH31001P sizing reference anchors it in the SH3 family, so a parametric match within that series is the only alternative path if supply tightens.","metaTitle":"Schneider Electric SH31001P1BA3000 Servo Motor, 1190 W","metaDescription":"Schneider Electric SH31001P1BA3000 servo motor, 1190 W continuous power, 6000 rpm max speed, absolute multiturn Hiperface DSL encoder. Current production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.6 in (168.5 mm)","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"2500 rpm 230 V single phase 5000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"1.40 kg.cm²","Nominal torque":"23.37 lbf.in (2.64 N.m) 230 V single phase 20.09 lbf.in (2.27 N.m) 400 V three phase 20.09 lbf.in (2.27 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"0.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1190 W","Mounting Support":"International standard flange","Sizing reference":"SH31001P","Back emf constant":"60 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"19 mH","Stator resistance":"3.8 Ohm","Maximum current Irms":"12 A","Nominal output power":"690 W 230 V single phase 1190 W 400 V three phase 1190 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"300 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"1530 N 2000 rpm 1340 N 3000 rpm 1930 N 1000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6ab7bbb1fb21d2d2132554f727d142a9.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31001P1BA3000/sh3-omc-motor-100mm-1-st-ip65-54-keyed-sh-dsl-multi-turn-str-conn-m23/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31001P1BA3000/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to SH31001P1BA3000 in the SH3 family?","answer":"No official successor or cross-reference is recorded for this order code. The SH31001P sizing reference anchors it in the SH3 family, so a parametric match within that series is the only alternative path if supply tightens."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001P1BA3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001P1BA3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}