{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001P1BA3100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001P1BA3100","canonicalUrl":"https://aoctrl.com/schneider/SH31001P1BA3100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001P1BA3100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31001P1BA3100, three-phase, 1190 W continuous power, 6000 rpm maximum mechanical speed, absolute multiturn Hiperface DSL encoder, IP65, without holding brake.","salesMarkdown":"## 1190 W, 6000 rpm — SH3 servo motor without brake The SH31001P1BA3100 is a three-phase SH3 servo motor from Schneider Electric, rated for 1190 W continuous power at 400 V or 480 V three-phase supply, and 690 W on 230 V single-phase. Nominal speed hits 2500 rpm on single-phase, 5000 rpm on 400 V three-phase, and 6000 rpm on 480 V three-phase. This variant ships without a holding brake, so the load must be held by the drive's dynamic braking or an external mechanical brake. The absolute multiturn Hiperface DSL encoder provides position feedback over a single cable — no separate encoder line needed, which simplifies the cable chain on moving axes. ## Torque and speed across supply voltages Nominal torque is 2.64 N.m on 230 V single-phase, dropping to 2.27 N.m on 400 V or 480 V three-phase. Peak stall torque reaches 9.6 N.m on 115–480 V three-phase, and continuous stall torque is 2.94 N.m across the same range. The motor's torque constant is 0.84 N.m/A at 120 °C copper temperature, and the back EMF constant is 60 V/krpm at 20 °C. Stator resistance is 3.8 Ohm, inductance 19 mH — these matter for the drive tuning loop, especially at the 6000 rpm ceiling. ## IP65, natural convection, and mechanical limits The motor body and shaft bushing both carry IP65 per IEC 60034-5, so it handles washdown and dust without an extra cover. Cooling is natural convection — no fan, so the ambient temperature and duty cycle govern the thermal budget. Maximum radial force at the shaft is 2240 N at 1000 rpm, dropping to 1550 N at 3000 rpm. Maximum axial force is 300 N. The shaft is 19 mm diameter with a parallel key, 40 mm length — standard for a 100 mm flange motor.","metaTitle":"Schneider Electric SH31001P1BA3100 Servo Motor, 1190 W","metaDescription":"Schneider Electric SH31001P1BA3100 SH3 servo motor, 1190 W continuous power, 6000 rpm max, absolute multiturn Hiperface DSL encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.6 in (168.5 mm)","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"2500 rpm 230 V single phase 5000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"1.40 kg.cm²","Nominal torque":"23.37 lbf.in (2.64 N.m) 230 V single phase 20.09 lbf.in (2.27 N.m) 400 V three phase 20.09 lbf.in (2.27 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"0.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1190 W","Mounting Support":"International standard flange","Sizing reference":"SH31001P","Back emf constant":"60 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"19 mH","Stator resistance":"3.8 Ohm","Maximum current Irms":"12 A","Nominal output power":"690 W 230 V single phase 1190 W 400 V three phase 1190 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"300 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"1550 N 3000 rpm 2240 N 1000 rpm 1780 N 2000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/648feb67fcca4d9238447fe49fbe2afa.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31001P1BA3100/sh3-servomotor-100mm-1-stack-keyed-shaft-multiturn-dsl-18bit-no-brake-onemotorcable-straight-m23-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31001P1BA3100/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001P1BA3100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001P1BA3100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}