{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31001P1BA4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31001P1BA4100","canonicalUrl":"https://aoctrl.com/schneider/SH31001P1BA4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31001P1BA4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31001P1BA4100, three-phase, 1190 W nominal output power at 400/480 V, 2.64 N.m nominal torque, absolute multiturn Hiperface DSL encoder, IP65, without holding brake, natural convection cooling.","salesMarkdown":"## Motor ratings that shift with the supply voltage The SH31001P1BA4100 is a three-phase servo motor whose output power and torque are specified at each supply voltage. At 400 V three-phase and 480 V three-phase, nominal output power is 1190 W; at 230 V single-phase it delivers 690 W. Nominal torque follows the same pattern: 2.64 N.m at 230 V single-phase, 2.27 N.m at both 400 V and 480 V three-phase. The nominal speed also varies — 2500 rpm at 230 V single-phase, 5000 rpm at 400 V three-phase, and 6000 rpm at 480 V three-phase. Continuous stall torque is 2.94 N.m across the 115...480 V three-phase range. Peak stall torque reaches 9.6 N.m under the same supply conditions. ## Encoder and feedback — absolute multiturn Hiperface DSL This motor carries an absolute multiturn Hiperface DSL encoder. The DSL protocol carries position and commutation data over a single cable pair, reducing wiring compared to separate encoder and power cables. The electrical connection uses a rotatable right-angled connector with a quicklock mechanism. The connector orientation can be adjusted on-site to suit cable routing in the enclosure. ## IP65 rating and mechanical interface The motor body and shaft bushing are both rated IP65 per IEC 60034-5. This means the motor withstands dust ingress and low-pressure water jets from any direction — suitable for washdown areas and dusty production floors. Cooling is by natural convection only — no external fan or coolant circuit. The motor flange size is 100 mm (3.9 in) with an international standard flange pattern. Maximum radial force at 1000 rpm is 2240 N, derating to 1550 N at 3000 rpm. The shaft has a parallel key, diameter 19 mm, length 40 mm, with a key width of 6 mm. The motor has 4 poles, stator resistance 3.8 Ohm, and stator inductance 19 mH. ## No holding brake — confirm the application Maximum current Irms is 12.0 A, with the same 12.0 A available as a 3s peak. The torque constant is 0.84 N.m/A at 120 °C copper temperature. ## Sourcing and lifecycle status The motor is part of the SH3 series, with sizing reference SH31001P.","metaTitle":"Schneider Electric SH31001P1BA4100 Servo Motor, 1190 W","metaDescription":"Schneider Electric SH31001P1BA4100 servo motor, 1190 W at 400/480 V three-phase. Absolute multiturn Hiperface DSL encoder, IP65, no brake.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31001P1BA4100","Length":"6.6 in (168.5 mm)","Inertia":"0.0 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 100mm, 1 stack, keyed Shaft, Multiturn DSL 18bit, no Brake, OneMotorCable angular M23, IP65/65","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"2500 rpm 230 V single phase 5000 rpm 400 V three phase 6000 rpm 480 V three phase","Rotor inertia":"1.40 kg.cm²","Nominal torque":"23.37 lbf.in (2.64 N.m) 230 V single phase 20.09 lbf.in (2.27 N.m) 400 V three phase 20.09 lbf.in (2.27 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"0.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1190 W","Mounting Support":"International standard flange","Sizing reference":"SH31001P","Back emf constant":"60 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"85.0 lbf.in (9.6 N.m) 115...480 V three phase","Stator inductance":"19 mH","Stator resistance":"3.8 Ohm","Maximum current Irms":"12.0 A","Nominal output power":"690 W 230 V single phase 1190 W 400 V three phase 1190 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"300 N","Output current 3s peak":"12.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"26.02 lbf.in (2.94 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"2240 N 1000 rpm 1780 N 2000 rpm 1550 N 3000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,678.86","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/624b445fd8a599e3c17e658eb1d44541.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31001P1BA4100/sh3-servomotor-100mm-1-stack-keyed-shaft-multiturn-dsl-18bit-no-brake-onemotorcable-angular-m23-ip65-65/"},"ai":{"faq":[{"question":"What is the closest alternative to SH31001P1BA4100 in the SH3 family?","answer":"The SH31001P sizing reference defines the frame and electrical ratings; a different variant would differ in brake, encoder type, or shaft configuration. Confirm the BOM position before substituting."},{"question":"What compliance documentation does Schneider Electric provide for SH31001P1BA4100?","answer":"The motor carries an IP65 rating conforming to IEC 60034-5. Standard Schneider Electric declarations of conformity for CE, UKCA, and RoHS are available on request. No UL listing is stated in the spec record."},{"question":"How can I order SH31001P1BA4100 or check availability?","answer":"Submit an RFQ for current pricing and lead time confirmation."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31001P1BA4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31001P1BA4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}