{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002M01F1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002M01F1000","canonicalUrl":"https://aoctrl.com/schneider/SH31002M01F1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002M01F1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with holding brake, SH31002M01F1000, 1.1 kW continuous power, 9 N·m holding torque, 100 mm flange, absolute single-turn SinCos Hiperface encoder, IP65/IP54.","salesMarkdown":"## Motor ratings that shift with the supply voltage The SH31002M01F1000's nominal speed and torque are not fixed; they depend on the supply voltage and phase configuration. At 400 V three-phase, nominal speed is 2000 rpm with 5.28 N·m nominal torque; at 480 V three-phase, speed reaches 2400 rpm with the same torque figure. On single-phase 230 V, the motor delivers 1000 rpm and 5.5 N·m, while at 115 V single-phase it drops to 500 rpm and 5.62 N·m. This voltage-dependent behavior means the BOM must specify the drive supply voltage before the motor's rated point can be confirmed for the application. Continuous stall torque is 5.8 N·m across the 115...480 V three-phase range, and peak stall torque reaches 18.3 N·m over the same range — useful for sizing acceleration torque in a pick-and-place cycle without oversizing the drive. ## Brake and encoder — what the holding torque and feedback mean for fit The absolute single-turn SinCos Hiperface encoder provides position feedback at power-up without a homing cycle, which simplifies commissioning on multi-axis lines where the machine must know its position immediately after a power cycle. Single-turn limits the absolute range to one revolution; multi-turn applications will need a different encoder option or a homing routine. ## IP rating and shaft seal — what the construction allows The motor carries IP65 protection when the shaft bushing includes a seal ring, and IP54 without it, per IEC 60034-5. The smooth shaft end and 19 mm diameter with 6 mm keyway are standard for coupling to a load without custom machining.","metaTitle":"Schneider Electric SH31002M01F1000 Servo Motor with Brake","metaDescription":"Schneider Electric SH31002M01F1000 SH3 servo motor with holding brake. 1.1 kW continuous, 9 N·m holding torque, Hiperface absolute encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"9.3 in (235.5 mm)","Inertia":"0.618 kg.cm² of brake 2.31 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"2.928 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"49.74 lbf.in (5.62 N.m) 115 V single phase 48.7 lbf.in (5.5 N.m) 230 V single phase 46.73 lbf.in (5.28 N.m) 400 V three phase 46.73 lbf.in (5.28 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.32 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1100 W","Mounting Support":"International standard flange","Sizing reference":"SH31002M","Back emf constant":"146 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"24.3 mH","Stator resistance":"8.6 Ohm","Maximum current Irms":"9.0 A","Nominal output power":"300 W 115 V single phase 580 W 230 V single phase 1090 W 400 V three phase 1280 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"9.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"2.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/cf3f3e000a4c4715e4c1a2ae4d6f3be1.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31002M01F1000/sh3-servomotor-100mm-2-stacks-high-torque-smooth-shaft-sincos-singleturn-128-brake-straight-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31002M01F1000/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation does Schneider Electric provide for SH31002M01F1000?","answer":"The motor is rated IP65/IP54 per IEC 60034-5. The evidence does not list RoHS, REACH, UL, or CE certifications for this specific order code — confirm the required documentation with the supplier at RFQ time."},{"question":"What is SH31002M01F1000's listed phase and length?","answer":"The motor is a three-phase design. Its overall length is 9.3 inches (235.5 mm)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002M01F1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002M01F1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}