{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002M01F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002M01F1200","canonicalUrl":"https://aoctrl.com/schneider/SH31002M01F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002M01F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH31002M01F1200 SH3 series servo motor with holding brake, 1100 W continuous power, 5.28 N.m nominal torque at 400/480 V three-phase, absolute single-turn SinCos Hiperface encoder, IP65/IP67, 100 mm flange.","salesMarkdown":"## Active production — what that means for your BOM line The SH31002M01F1200: It is a three-phase servo motor from Schneider's SH3 family, delivering 1100 W continuous power with a holding brake rated at 9 N.m (79.7 lbf.in). The brake is integral — no external mechanical lock needed for vertical-axis hold or safety stops. ## Speed and torque depend on your supply voltage This motor's nominal speed and torque shift with the input voltage. On 400 V three-phase, it spins 2000 rpm and delivers 5.28 N.m nominal torque; on 480 V three-phase, it reaches 2400 rpm at the same torque. At 230 V single-phase, speed drops to 1000 rpm with 5.5 N.m torque. The nominal output power also varies — 1090 W at 400 V, 1280 W at 480 V, 580 W at 230 V single-phase. The peak stall torque is 18.3 N.m across the 115–480 V three-phase range, and continuous stall torque sits at 5.8 N.m. That gives you a 3.15× peak-to-continuous ratio — enough for short-duration overloads during acceleration or reversing. ## Encoder and feedback — absolute single-turn SinCos Hiperface The encoder is an absolute single-turn SinCos Hiperface type. No homing sequence needed on power-up — the drive knows the rotor position immediately. This matters for applications where the machine must resume position after a power cycle without a reference move. The feedback cable interface uses a rotatable right-angle connector or a straight connector — both are listed as options. Choose the right-angle version when cable clearance is tight against the machine frame; the straight connector suits through-panel routing. ## IP65/IP67 — where you can mount it The motor body carries IP65 per IEC 60034-5, and the shaft bushing is also IP65. The housing is rated IP67 — meaning it survives temporary submersion. This covers washdown environments, coolant splash, and dusty conditions. The connector must be properly mated to maintain the seal. Cooling is by natural convection — no external fan or forced air. The maximum radial force at the shaft is 990 N at 1000 rpm, dropping to 620 N at 4000 rpm. Maximum axial force is 160 N. These limits govern the coupling and belt-drive design. ## Mechanical fit — flange, shaft, and mounting The motor flange size is 100 mm (3.9 in) with an international standard flange pattern. Centring collar diameter is 95 mm (3.7 in), depth 3.5 mm (0.1 in). Mounting holes are 9.0 mm diameter. The shaft is 19 mm diameter, 40 mm long, with a 6 mm keyway and a smooth shaft end.","metaTitle":"Schneider Electric SH31002M01F1200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31002M01F1200 SH3 servo motor with brake, 1100 W continuous power, 5.28 N.m nominal torque at 400/480 V three-phase.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"9.3 in (235.5 mm)","Inertia":"0.618 kg.cm² of brake 2.31 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"2.928 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"49.74 lbf.in (5.62 N.m) 115 V single phase 48.7 lbf.in (5.5 N.m) 230 V single phase 46.73 lbf.in (5.28 N.m) 400 V three phase 46.73 lbf.in (5.28 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.32 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1100 W","Mounting Support":"International standard flange","Sizing reference":"SH31002M","Back emf constant":"146 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"24.3 mH","Stator resistance":"8.6 Ohm","Maximum current Irms":"9.0 A","Nominal output power":"300 W 115 V single phase 580 W 230 V single phase 1090 W 400 V three phase 1280 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"9.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"2.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e639d745e33c3c24b2ca2c87b09db675.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31002M01F1200/sh3-servomotor-100mm-2-stacks-high-torque-smooth-shaft-sincos-singleturn-128-brake-straight-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31002M01F1200/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002M01F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002M01F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}