{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002M01F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002M01F2200","canonicalUrl":"https://aoctrl.com/schneider/SH31002M01F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002M01F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor with brake, SH31002M01F2200, 1100 W continuous power, 5.62 N.m nominal torque, absolute single-turn SinCos Hiperface encoder, IP65, three-phase.","salesMarkdown":"## Motor specs that matter for the BOM line The SH31002M01F2200: The nominal speed varies with the supply: 500 rpm on 115 V single-phase, 1000 rpm on 230 V single-phase, 2000 rpm on 400 V three-phase, and 2400 rpm on 480 V three-phase — so the actual line voltage decides the speed you get. It carries an absolute single-turn SinCos Hiperface encoder, which means the drive knows the rotor position at power-up without a homing routine — a real time-saver on a machine that cycles power regularly. The holding brake delivers 9 N.m (79.7 lbf.in) of holding torque, enough to keep a vertical load from drifting when the drive is disabled. ## Mounting and environmental fit Flange size is 100 mm (3.9 in) with an international standard flange pattern — the centring collar is 95 mm diameter, 3.5 mm deep, so it locates positively on the mating face. Overall length is 235.5 mm (9.3 in) with a smooth 19 mm shaft, 40 mm long, and a 6 mm keyway. IP65 on the motor body and shaft bushing, IP67 on the housing — it handles washdown spray without the water finding its way past the seal. Cooling is natural convection, so no fan noise or airflow path to keep clear — but the thermal budget depends on the mounting surface and ambient air movement. ## Torque and electrical characteristics Peak stall torque is 18.3 N.m (162 lbf.in) across the 115-480 V three-phase range — useful for short-duration acceleration or overcoming static friction. Continuous stall torque is 5.8 N.m (51.3 lbf.in), and the torque constant is 2.32 N.m/A at 120 °C copper temperature — so the current loop gain in the drive should be set for that value. Stator resistance is 8.6 Ω and inductance is 24.3 mH — these matter for the drive's current regulator tuning, especially at the higher switching frequencies. Maximum continuous RMS current is 9.0 A, with the same value for the 3-second peak — the drive's current rating must match this to avoid nuisance trips.","metaTitle":"Schneider Electric SH31002M01F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31002M01F2200 SH3 servo motor with brake. 1100 W, 5.62 Nm nominal torque, IP65, absolute single-turn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"9.3 in (235.5 mm)","Inertia":"0.618 kg.cm² of brake 2.31 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"2.928 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"49.74 lbf.in (5.62 N.m) 115 V single phase 48.7 lbf.in (5.5 N.m) 230 V single phase 46.73 lbf.in (5.28 N.m) 400 V three phase 46.73 lbf.in (5.28 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.32 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1100 W","Mounting Support":"International standard flange","Sizing reference":"SH31002M","Back emf constant":"146 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"24.3 mH","Stator resistance":"8.6 Ohm","Maximum current Irms":"9.0 A","Nominal output power":"300 W 115 V single phase 580 W 230 V single phase 1090 W 400 V three phase 1280 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"9.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"2.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/53beca26266d9bc772be29caa5fc97d2.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31002M01F2200/sh3-servomotor-100mm-2-stacks-high-torque-smooth-shaft-sincos-singleturn-128-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31002M01F2200/alternatives.json"},"ai":{"faq":[{"question":"What encoder does the SH31002M01F2200 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. No homing sequence is needed at power-up — the drive reads the position directly."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002M01F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002M01F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}