{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002M02A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002M02A2000","canonicalUrl":"https://aoctrl.com/schneider/SH31002M02A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002M02A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31002M02A2000, 1.1 kW continuous power, 5.28 Nm nominal torque at 400 V three-phase, absolute multiturn SinCos Hiperface encoder, IP54/IP65, smooth shaft, natural convection cooling.","salesMarkdown":"## Speed and torque across supply voltages The SH31002M02A2000: This motor delivers 5.62 Nm at 500 rpm on 115 V single-phase, 5.5 Nm at 1000 rpm on 230 V single-phase, and 5.28 Nm at 2000 rpm on 400 V three-phase — the torque curve is nearly flat across the voltage range, but the speed ceiling shifts with the supply. At 480 V three-phase it reaches 2400 rpm at the same 5.28 Nm. Peak stall torque is 18.3 Nm across the 115–480 V three-phase range, giving a 3.5× overload margin above the nominal 5.28 Nm for acceleration or load transients. ## Encoder and feedback — absolute multiturn Hiperface The absolute multiturn SinCos Hiperface encoder eliminates the need for a homing sequence on power-up — the rotor position is known from the moment the drive enables. This matters for applications where the machine must resume from the last position after a power cycle, such as pick-and-place or gantry axes. ## IP rating and environmental sealing IP54 at the shaft bushing without the shaft seal ring; IP65 on the motor body and IP65 at the shaft bushing when the seal ring is fitted — both conforming to IEC 60034-5. In a washdown or high-humidity environment, the shaft seal ring is required to keep the bearing cavity dry. ## Mechanical interface and mounting International standard flange, 100 mm square, with a 95 mm centring collar and 3.5 mm centring collar depth. The smooth shaft is 19 mm diameter with a 6 mm keyway and 40 mm shaft length — standard for direct coupling to a ball screw or timing-belt pulley without a custom adapter.","metaTitle":"Schneider Electric SH31002M02A2000 Servo Motor, 1.1 kW","metaDescription":"Schneider Electric SH31002M02A2000 servo motor, 1.1 kW continuous power, 5.28 Nm nominal torque at 400 V three-phase.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.05 in (204.5 mm)","Inertia":"0.0 kg.cm² of brake 0.0 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"2.31 kg.cm²","Nominal torque":"49.74 lbf.in (5.62 N.m) 115 V single phase 48.7 lbf.in (5.5 N.m) 230 V single phase 46.73 lbf.in (5.28 N.m) 400 V three phase 46.73 lbf.in (5.28 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.32 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1100 W","Mounting Support":"International standard flange","Sizing reference":"SH31002M","Back emf constant":"146 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"70.2 mH","Stator resistance":"8.6 Ohm","Maximum current Irms":"9.0 A","Nominal output power":"300 W 115 V single phase 580 W 230 V single phase 1090 W 400 V three phase 1280 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"9.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"2.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3f6a262ae4fe6a90db6115d77d7f9d04.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31002M02A2000/sh3-servomotor-100mm-2-stacks-high-torque-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31002M02A2000/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation does Schneider Electric provide for SH31002M02A2000?","answer":"The motor carries IP54/IP65 protection ratings conforming to IEC 60034-5. Full RoHS and REACH declarations are standard with Schneider Electric servo products; the specific declaration of conformity for this model is available on request."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002M02A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002M02A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}