{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002M02A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002M02A2200","canonicalUrl":"https://aoctrl.com/schneider/SH31002M02A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002M02A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31002M02A2200, 1.1 kW, 5.6 Nm, 2000 rpm at 400 V three-phase, absolute multiturn SinCos Hiperface encoder, smooth shaft, IP65/IP67.","salesMarkdown":"## Motor specs that matter for your machine The SH31002M02A2200 is a 1.1 kW servo motor from Schneider's SH3 series, built for three-phase systems. At 400 V three-phase it delivers 5.28 Nm continuous torque at 2000 rpm nominal speed, with a peak stall torque of 18.3 Nm for short-term overloads. The motor runs at 2400 rpm on 480 V three-phase input, and at lower speeds on single-phase supplies — 500 rpm at 115 V single-phase and 1000 rpm at 230 V single-phase. Torque holds relatively flat across the voltage range, from 5.62 Nm at 115 V down to 5.28 Nm at 480 V. It carries an absolute multiturn SinCos Hiperface encoder, so position is known immediately on power-up — no homing cycle needed after a power loss. The encoder type matters when pairing with a compatible drive; the Hiperface protocol requires the drive to support it. ## Mechanical fit and mounting Electrical connection is via a straight connector (rotatable right-angle connector also listed), which simplifies cable routing in tight cabinets. The IP65 rating on the motor body and shaft bushing, plus IP67 on the housing, means it handles washdown environments — suitable for food processing or wet machining lines. ## Drive pairing and thermal limits The motor is a 4-pole design with a torque constant of 2.32 Nm/A at 120°C copper temperature. Continuous stall current is 2.5 A, with a maximum RMS current of 9.0 A (also the 3-second peak current). The drive must supply at least 9 A peak for short-term overloads. Stator resistance is 8.6 Ω and inductance is 24.3 mH — these values go into the drive's auto-tuning routine for current loop gains. Back EMF constant is 146 V/krpm at 20°C, which means at 2000 rpm the motor generates 292 V back EMF — the drive DC bus must stay above this to maintain current control. Cooling is by natural convection — no fan, so the motor relies on its own surface area and the machine's airflow. The copper winding temperature limit is 130°C; the drive's thermal model should protect against sustained overload above the continuous stall torque of 5.8 Nm. Maximum radial force at the shaft is 990 N at 1000 rpm, dropping to 620 N at 4000 rpm. Maximum axial force is 160 N. These limits govern bearing life — a belt drive or overhung load that exceeds these will shorten bearing life significantly. ## Sourcing reality — active and quoted to order This is the smooth-shaft, no-brake variant of the SH31002M frame. If your application needs a keyed shaft or a holding brake, you're looking at a different suffix. The sizing reference SH31002M groups the family; the full order code determines the exact configuration.","metaTitle":"Schneider Electric SH31002M02A2200 Servo Motor, 1.1 kW","metaDescription":"Schneider Electric SH31002M02A2200 servo motor, 1.1 kW continuous power, 5.6 Nm torque at 400 V three-phase. IP65/IP67, absolute multiturn encoder, smooth","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.05 in (204.5 mm)","Inertia":"0.0 kg.cm² of brake 2.31 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"2.31 kg.cm²","Nominal torque":"49.74 lbf.in (5.62 N.m) 115 V single phase 48.7 lbf.in (5.5 N.m) 230 V single phase 46.73 lbf.in (5.28 N.m) 400 V three phase 46.73 lbf.in (5.28 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.32 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1100 W","Mounting Support":"International standard flange","Sizing reference":"SH31002M","Back emf constant":"146 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"24.3 mH","Stator resistance":"8.6 Ohm","Maximum current Irms":"9.0 A","Nominal output power":"300 W 115 V single phase 580 W 230 V single phase 1090 W 400 V three phase 1280 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"9.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"2.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6253706e679b526c490178b17f4c40ac.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31002M02A2200/sh3-servomotor-100mm-2-stacks-high-torque-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31002M02A2200/alternatives.json"},"ai":{"faq":[{"question":"What is the SH31002M02A2200's phase and power rating?","answer":"The motor is a three-phase design with 1.1 kW continuous power. At 400 V three-phase it delivers 5.28 Nm torque at 2000 rpm; at 480 V three-phase it runs at 2400 rpm with the same torque."},{"question":"What encoder does the SH31002M02A2200 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder, so position is retained on power loss and no homing cycle is needed. The drive must support the Hiperface protocol."},{"question":"Does the SH31002M02A2200 have a holding brake?","answer":"No, this variant ships without a holding brake. If your application requires the motor to hold position on power-off, you need the braked version of this frame."},{"question":"What is the IP rating of the SH31002M02A2200?","answer":"The motor body and shaft bushing are IP65 rated, and the housing is IP67 rated per IEC 60034-5. It withstands washdown environments typical in food processing or wet machining."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002M02A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002M02A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}