{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002M02F1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002M02F1100","canonicalUrl":"https://aoctrl.com/schneider/SH31002M02F1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002M02F1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31002M02F1100, 1100 W continuous power, 5.62 Nm nominal torque, 9 Nm holding brake, IP65, absolute multiturn SinCos Hiperface encoder, smooth shaft, 19 mm shaft diameter, 235.5 mm length.","salesMarkdown":"## Speed and torque across supply voltages The SH31002M02F1100 delivers nominal torque of 5.62 Nm at 115 V single-phase, 5.5 Nm at 230 V single-phase, and 5.28 Nm at both 400 V and 480 V three-phase supplies. Nominal speed varies from 500 rpm on 115 V single-phase up to 2400 rpm on 480 V three-phase, so the same motor frame covers a wide range of line voltages — useful when a machine ships to multiple regions and the drive voltage isn't fixed until the install site. Continuous output power follows the same pattern: 300 W at 115 V single-phase, 580 W at 230 V single-phase, 1090 W at 400 V three-phase, and 1280 W at 480 V three-phase. The 1100 W continuous power rating on the nameplate corresponds to the 400 V three-phase condition. ## Brake and encoder — what they mean for a motion axis The holding brake delivers 9 Nm (79.7 lbf·in) of holding torque, which is well above the motor's own continuous stall torque of 5.8 Nm — the brake can hold the load stationary even if the motor is de-energized, critical for vertical axes or any application where the load must not drift when power is removed. The absolute multiturn SinCos Hiperface encoder reports position over multiple shaft revolutions without needing a homing cycle after power-up — a time-saver on machines that are power-cycled frequently or where a reference run would interrupt production. The encoder type also determines the compatible drive: Hiperface is a standard interface on many Schneider and third-party servo drives. ## IP65 and mounting — ready for washdown environments The motor body and shaft bushing are both rated IP65 per IEC 60034-5, meaning the enclosure withstands dust ingress and low-pressure water jets from any direction. This suits food-and-beverage, pharmaceutical, or other washdown lines where the motor is exposed to cleaning sprays. Mounting uses an international standard flange with a 100 mm flange size and a 95 mm centring collar. The smooth shaft is 19 mm diameter by 40 mm long with a 6 mm keyway — standard for coupling to a load via a flexible shaft coupling or timing-belt pulley.","metaTitle":"Schneider Electric SH31002M02F1100 Servo Motor with Brake","metaDescription":"Schneider Electric SH31002M02F1100 SH3 servo motor with brake, 1100 W continuous power, 5.62 Nm nominal torque, IP65, absolute multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"9.3 in (235.5 mm)","Inertia":"0.618 kg.cm² of brake 2.31 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"2.928 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"49.74 lbf.in (5.62 N.m) 115 V single phase 48.7 lbf.in (5.5 N.m) 230 V single phase 46.73 lbf.in (5.28 N.m) 400 V three phase 46.73 lbf.in (5.28 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.32 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1100 W","Mounting Support":"International standard flange","Sizing reference":"SH31002M","Back emf constant":"146 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"24.3 mH","Stator resistance":"8.6 Ohm","Maximum current Irms":"9.0 A","Nominal output power":"300 W 115 V single phase 580 W 230 V single phase 1090 W 400 V three phase 1280 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"9.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"2.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a494713d131a588e5b233d64cdbafb05.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH31002M02F1100/sh3-servomotor-100mm-2-stacks-high-torque-smooth-shaft-sincos-multiturn-128-brake-straight-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31002M02F1100/alternatives.json"},"ai":{"faq":[{"question":"What is SH31002M02F1100's listed phase?","answer":"The motor is a three-phase design, though it operates on both single-phase and three-phase supplies depending on the voltage — see the speed and torque table for the ratings at each supply type."},{"question":"What is SH31002M02F1100's listed length?","answer":"The overall length is 9.3 inches (235.5 mm). This is the body length excluding the shaft extension and connector."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002M02F1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002M02F1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}