{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002M02F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002M02F2000","canonicalUrl":"https://aoctrl.com/schneider/SH31002M02F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002M02F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31002M02F2000, three-phase, 1100 W continuous power, 9 N.m holding torque, absolute multiturn SinCos Hiperface encoder, IP54/IP65, 100 mm flange.","salesMarkdown":"## Motor frame and feedback — what fits the machine The SH31002M02F2000: This SH3-series servo motor carries a 100 mm international standard flange (3.9 in) with a 19 mm smooth shaft and a 6 mm keyway — the mounting interface that determines mechanical interchange in a machine build or retrofit. The feedback is an absolute multiturn SinCos Hiperface encoder — it retains position through power cycles without a home sequence, which saves time on machines that power down between shifts or after fault trips. ## Torque and speed across supply voltages Nominal speed ranges from 500 rpm on 115 V single-phase supply up to 2400 rpm on 480 V three-phase — the same motor covers low-speed indexing and high-speed spindle applications depending on the drive and line voltage available. Nominal torque holds between 5.28 N.m and 5.62 N.m across the voltage range, with peak stall torque reaching 18.3 N.m for short-duration acceleration or deceleration events. Continuous power is rated 1100 W, with the motor cooled by natural convection — no external fan or coolant lines, so the thermal budget depends on the mounting surface and ambient air movement in the enclosure. ## Brake and sealing — holding the load in place The integrated holding brake delivers 9 N.m holding torque — enough to keep a vertical-axis load or a conveyor stop position without a separate mechanical lock or brake resistor. IP54 on the shaft bushing without the shaft seal ring, IP65 with the seal ring fitted — choose the seal configuration based on whether the motor sees washdown or just dry dust exposure.","metaTitle":"Schneider Electric SH31002M02F2000 Servo Motor with Brake","metaDescription":"Schneider Electric SH31002M02F2000 servo motor with holding brake, 1100 W continuous power, 9 N.m holding torque, absolute multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"9.3 in (235.5 mm)","Inertia":"0.618 kg.cm² of brake 2.31 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"2.928 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"49.74 lbf.in (5.62 N.m) 115 V single phase 48.7 lbf.in (5.5 N.m) 230 V single phase 46.73 lbf.in (5.28 N.m) 400 V three phase 46.73 lbf.in (5.28 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.32 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1100 W","Mounting Support":"International standard flange","Sizing reference":"SH31002M","Back emf constant":"146 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"24.3 mH","Stator resistance":"8.6 Ohm","Maximum current Irms":"9.0 A","Nominal output power":"300 W 115 V single phase 580 W 230 V single phase 1090 W 400 V three phase 1280 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"9.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"2.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/327f45295edecf76a5ed950b4c8f3cf3.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH31002M02F2000/sh3-servomotor-100mm-2-stacks-high-torque-smooth-shaft-sincos-multiturn-128-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31002M02F2000/alternatives.json"},"ai":{"faq":[{"question":"What encoder type does SH31002M02F2000 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder, which retains position through power cycles and eliminates the need for a homing routine on startup."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002M02F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002M02F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}