{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002M02F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002M02F2200","canonicalUrl":"https://aoctrl.com/schneider/SH31002M02F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002M02F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31002M02F2200, 1100 W continuous power, 5.62 Nm nominal torque, 9 Nm holding brake, IP65, absolute multiturn SinCos Hiperface encoder, smooth shaft 19 mm diameter.","salesMarkdown":"## Speed and torque across supply voltages This SH31002M02F2200 servo motor delivers different nominal speeds depending on the supply: 500 rpm on 115 V single phase, 1000 rpm on 230 V single phase, 2000 rpm on 400 V three phase, and 2400 rpm on 480 V three phase. Nominal torque also shifts with the supply — 5.62 Nm at 115 V single phase, 5.5 Nm at 230 V single phase, and 5.28 Nm on both 400 V and 480 V three-phase supplies. Peak stall torque is 18.3 Nm across the 115 to 480 V three-phase range, giving a healthy overload margin for acceleration and deceleration transients. ## Brake and encoder — what locks and what tracks The integrated holding brake delivers 9 Nm of holding torque — enough to hold the load on a vertical axis when power is removed, without needing an external brake resistor or mechanical lock. Feedback comes from an absolute multiturn SinCos Hiperface encoder, which means the drive knows the rotor position at power-up without a homing sequence — critical for applications where the machine must resume from the last known position after a power cycle. ## Environmental sealing and mechanical limits The motor body and shaft bushing carry IP65 per IEC 60034-5, and the housing is rated IP67 — the motor handles washdown environments and coolant splash without additional shrouding. Maximum radial force on the shaft drops from 990 N at 1000 rpm to 620 N at 4000 rpm — factor this into the belt-drive or direct-coupling design to avoid bearing overload at higher speeds. Maximum axial force is 160 N, so any external thrust load (from a leadscrew or helical gear) must stay below that limit or a thrust bearing must be added externally. ## Sourcing and lifecycle — current production, quoted to order The motor flange is the international standard 100 mm size (3.9 in) with a 95 mm centring collar and 9 mm mounting holes — fits the common IEC frame pattern for direct replacement in existing machine builds.","metaTitle":"Schneider Electric SH31002M02F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31002M02F2200 servo motor with brake, 1100 W continuous power, IP65, absolute multiturn Hiperface encoder. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"9.3 in (235.5 mm)","Inertia":"0.618 kg.cm² of brake 2.31 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"2.928 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"49.74 lbf.in (5.62 N.m) 115 V single phase 48.7 lbf.in (5.5 N.m) 230 V single phase 46.73 lbf.in (5.28 N.m) 400 V three phase 46.73 lbf.in (5.28 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.32 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1100 W","Mounting Support":"International standard flange","Sizing reference":"SH31002M","Back emf constant":"146 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"24.3 mH","Stator resistance":"8.6 Ohm","Maximum current Irms":"9.0 A","Nominal output power":"300 W 115 V single phase 580 W 230 V single phase 1090 W 400 V three phase 1280 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"9.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"2.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d84eb8466a7042f8c91bf8372707990d.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31002M02F2200/sh3-servomotor-100mm-2-stacks-high-torque-smooth-shaft-sincos-multiturn-128-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31002M02F2200/alternatives.json"},"ai":{"faq":[{"question":"What is the holding brake torque on SH31002M02F2200?","answer":"The integrated holding brake delivers 9 Nm of holding torque. This is sufficient to secure a vertical-axis load when power is removed, without an external brake circuit."},{"question":"What encoder type does SH31002M02F2200 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder. This provides rotor position at power-up without a homing sequence, supporting applications that must resume from the last known position after a power cycle."},{"question":"What is the IP rating of SH31002M02F2200?","answer":"The motor body and shaft bushing are rated IP65, and the housing is rated IP67 per IEC 60034-5. The motor handles washdown environments and coolant splash without additional shrouding."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002M02F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002M02F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}