{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002M11A1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002M11A1100","canonicalUrl":"https://aoctrl.com/schneider/SH31002M11A1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002M11A1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31002M11A1100, 1100 W continuous power, 5.28 N.m nominal torque at 400 V three-phase, 2000 rpm, IP65, absolute single-turn SinCos Hiperface encoder, natural convection cooling, without holding brake.","salesMarkdown":"## Speed-torque envelope across supply voltages The SH31002M11A1100: This SH3 frame servo delivers 1100 W continuous power, but the nominal speed and torque shift with the supply. At 400 V three-phase it spins 2000 rpm with 5.28 N.m; on 480 V three-phase the same torque holds at 2400 rpm. Single-phase 230 V drops the speed to 1000 rpm at 5.5 N.m, and 115 V single-phase runs 500 rpm at 5.62 N.m. The peak stall torque of 18.3 N.m is available across the 115...480 V three-phase range for short accelerations. ## Feedback and environmental sealing The encoder is an absolute single-turn SinCos Hiperface — single-turn means position is known on power-up within one revolution; no homing cycle needed for rotary applications that stay within 360°. The Hiperface protocol is common on Schneider drives and third-party servo drives that support the interface. IP65 per IEC 60034-5 on both the motor body and the shaft bushing — the seal at the shaft exit is the wet-end barrier, not just the housing. This suits washdown environments in food-and-bev or packaging lines where hose-down cleaning is routine. ## No holding brake — plan the axis hold This variant ships without a holding brake. On a vertical axis or any load that must stay put when the drive is disabled, the application needs either an external brake, a mechanical counterbalance, or the drive's holding torque at zero speed (the continuous stall torque is 5.8 N.m, but the drive must remain enabled to hold it). If the machine cycle includes long stopped periods with the drive off, spec the braked variant instead. ## Sourcing and lifecycle — active production The electrical connection is a straight connector — no right-angle or cable-whip variant here. Confirm the mating connector part number from the drive-side interface before committing the panel layout.","metaTitle":"Schneider Electric SH31002M11A1100 Servo Motor, 1100 W","metaDescription":"Schneider Electric SH31002M11A1100 SH3 servo motor, 1100 W continuous, 5.28 N.m nominal torque at 400 V three-phase, IP65, absolute Hiperface encoder, natural","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.05 in (204.5 mm)","Inertia":"0.0 kg.cm² of brake 2.31 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"2.31 kg.cm²","Nominal torque":"49.74 lbf.in (5.62 N.m) 115 V single phase 48.7 lbf.in (5.5 N.m) 230 V single phase 46.73 lbf.in (5.28 N.m) 400 V three phase 46.73 lbf.in (5.28 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.32 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1100 W","Mounting Support":"International standard flange","Sizing reference":"SH31002M","Back emf constant":"146 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"24.3 mH","Stator resistance":"8.6 Ohm","Maximum current Irms":"9.0 A","Nominal output power":"300 W 115 V single phase 580 W 230 V single phase 1090 W 400 V three phase 1280 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"9.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"2.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d7ecf303e423561a97f583bcd739bbac.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH31002M11A1100/sh3-servomotor-100mm-2-stacks-high-torque-keyed-shaft-sincos-singleturn-128-no-brake-straight-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31002M11A1100/alternatives.json"},"ai":{"faq":[{"question":"What is the nominal torque of SH31002M11A1100 at 400 V three-phase?","answer":"At 400 V three-phase, nominal torque is 5.28 N.m at 2000 rpm. At 480 V three-phase the same torque holds at 2400 rpm."},{"question":"Does SH31002M11A1100 include a holding brake?","answer":"No, this variant ships without a holding brake. The continuous stall torque of 5.8 N.m is available if the drive remains enabled, but for vertical loads or power-off holding an external brake is required."},{"question":"What encoder type does SH31002M11A1100 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. Single-turn means absolute position within one revolution; the Hiperface interface is widely supported on Schneider and third-party servo drives."},{"question":"What is the IP rating of SH31002M11A1100?","answer":"IP65 per IEC 60034-5 on both the motor body and the shaft bushing, making it suitable for washdown environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002M11A1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002M11A1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}