{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002M11A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002M11A2200","canonicalUrl":"https://aoctrl.com/schneider/SH31002M11A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002M11A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31002M11A2200, 1100 W, 5.28 N·m at 400 V three-phase, absolute single-turn SinCos Hiperface encoder, IP65/IP67, 100 mm flange, parallel key shaft.","salesMarkdown":"## 1100 W SH3 servo — supply-voltage-dependent performance The SH31002M11A2200 is a 1100 W continuous-power servo motor from Schneider Electric's SH3 series, with a 100 mm flange and a parallel-key shaft (0.7 in diameter, 1.6 in length). Its nominal torque and speed are supply-voltage dependent: at 400 V three-phase it delivers 5.28 N·m at 2000 rpm, while at 480 V three-phase the same torque holds at 2400 rpm. On single-phase 230 V, torque drops to 5.5 N·m at 1000 rpm; on 115 V single-phase, it's 5.62 N·m at 500 rpm. The absolute single-turn SinCos Hiperface encoder eliminates the need for a homing sequence on power-up — the drive reads the absolute position immediately. This matters for applications where the machine must resume operation without a reference move after a power cycle. ## Torque and overload — continuous vs peak The 4-pole motor with stator resistance 8.6 Ω and inductance 70.2 mH sets the electrical time constant — expect the current loop to settle within a few milliseconds with a properly tuned servo drive. Maximum radial force derates with speed: 990 N at 1000 rpm, 790 N at 2000 rpm, 690 N at 3000 rpm, 620 N at 4000 rpm — belt or pulley loads must respect this envelope to avoid bearing overload. ## Sealing and environmental rating The motor carries IP65 on the body and shaft bushing, with IP67 on the housing per IEC 60034-5. In practice, the housing seal exceeds the body rating — the connector end is the wet-end barrier. The straight connector and rotatable right-angled connector are both sealed; the rotatable version allows cable exit orientation adjustment during installation without breaking the seal. Natural convection cooling means no fan — the motor relies on its surface area and the mounting flange for heat dissipation, so derate if enclosed in a non-ventilated cavity.","metaTitle":"Schneider Electric SH31002M11A2200 Servo Motor, 1100 W","metaDescription":"Schneider Electric SH31002M11A2200 SH3 servo motor, 1100 W continuous, 5.28 N·m at 400 V three-phase, IP65/IP67, absolute Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.05 in (204.5 mm)","Inertia":"0.0 kg.cm² of brake 0.0 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"2.31 kg.cm²","Nominal torque":"49.74 lbf.in (5.62 N.m) 115 V single phase 48.7 lbf.in (5.5 N.m) 230 V single phase 46.73 lbf.in (5.28 N.m) 400 V three phase 46.73 lbf.in (5.28 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.32 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1100 W","Mounting Support":"International standard flange","Sizing reference":"SH31002M","Back emf constant":"146 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"70.2 mH","Stator resistance":"8.6 Ohm","Maximum current Irms":"9.0 A","Nominal output power":"300 W 115 V single phase 580 W 230 V single phase 1090 W 400 V three phase 1280 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"9.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"2.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/1ccfec3396fb703ca22bd151501c9f02.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31002M11A2200/sh3-servomotor-100mm-2-stacks-high-torque-keyed-shaft-sincos-singleturn-128-no-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31002M11A2200/alternatives.json"},"ai":{"faq":[{"question":"What is the SH31002M11A2200's rated torque at 400 V three-phase?","answer":"At 400 V three-phase, nominal torque is 5.28 N·m at 2000 rpm, with continuous stall torque of 5.8 N·m and peak stall torque of 18.3 N·m for up to 3 seconds."},{"question":"What encoder type does the SH31002M11A2200 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder — no homing sequence needed on power-up."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002M11A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002M11A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}