{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002M11F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002M11F1200","canonicalUrl":"https://aoctrl.com/schneider/SH31002M11F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002M11F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH31002M11F1200 SH3 series servo motor with brake, 1.1 kW continuous power, 5.28 N.m nominal torque at 400/480 V three-phase, 9 N.m holding brake, absolute single-turn SinCos Hiperface encoder, IP65, 100 mm flange.","salesMarkdown":"## What this SH3 servo motor delivers on a machine The SH31002M11F1200 is a 1.1 kW continuous-power servo motor from Schneider Electric's SH3 family, built for three-phase supply. It carries an integrated holding brake rated at 9 N.m — enough to hold a vertical axis stationary when power is removed, so no external brake resistor or mechanical lock is needed on the load side. The absolute single-turn SinCos Hiperface encoder gives position feedback at power-up without a homing cycle — the drive knows exactly where the shaft is the instant the bus comes up. That saves a reference move on every restart, which matters on machines that cycle power between batches or shifts. ## Speed and torque across supply voltages Nominal speed depends on the supply: 500 rpm at 115 V single-phase, 1000 rpm at 230 V single-phase, 2000 rpm at 400 V three-phase, and 2400 rpm at 480 V three-phase. The nominal torque also shifts — 5.62 N.m at 115 V single-phase, 5.5 N.m at 230 V single-phase, and 5.28 N.m at both 400 V and 480 V three-phase. That means the same motor delivers higher throughput on a 480 V line without re-winding. Peak stall torque is 18.3 N.m across the 115–480 V three-phase range, and continuous stall torque is 5.8 N.m. The torque constant is 2.32 N.m/A at 120 °C copper temperature, so the drive current limit can be set knowing the motor's hot-state output. ## Mounting and environmental sealing The motor uses a 100 mm international standard flange with a 95 mm centring collar and 9 mm mounting holes. Overall length is 235.5 mm, and the shaft is 19 mm diameter with a parallel key and 40 mm shaft length. The rotatable right-angle connector lets the cable exit in the direction that best fits the cable tray — no need for a separate right-angle adapter. IP65 on the motor body and shaft bushing, IP67 on the housing — conforming to IEC 60034-5. That means the motor handles washdown spray without a cover boot, suitable for food processing or packaging lines where hose-down cleaning is routine. No official successor or cross-reference is listed for this order code. The SH3 family is the active series; the sizing reference SH31002M identifies the frame and winding variant.","metaTitle":"Schneider Electric SH31002M11F1200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31002M11F1200 SH3 servo motor with brake, 1.1 kW continuous power, 9 N.m holding torque, IP65, absolute Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"9.3 in (235.5 mm)","Inertia":"0.618 kg.cm² of brake 2.31 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"2.928 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"49.74 lbf.in (5.62 N.m) 115 V single phase 48.7 lbf.in (5.5 N.m) 230 V single phase 46.73 lbf.in (5.28 N.m) 400 V three phase 46.73 lbf.in (5.28 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.32 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1100 W","Mounting Support":"International standard flange","Sizing reference":"SH31002M","Back emf constant":"146 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"24.3 mH","Stator resistance":"8.6 Ohm","Maximum current Irms":"9.0 A","Nominal output power":"300 W 115 V single phase 580 W 230 V single phase 1090 W 400 V three phase 1280 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"9.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"2.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f6c1978a2a71e462d565a622fdaf7239.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31002M11F1200/sh3-servomotor-100mm-2-stacks-high-torque-keyed-shaft-sincos-singleturn-128-brake-straight-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31002M11F1200/alternatives.json"},"ai":{"faq":[{"question":"What is the holding brake torque on this servo motor?","answer":"The integrated holding brake delivers 9 N.m (79.7 lbf.in) of holding torque, which keeps the motor shaft locked when power is off. This is sufficient for vertical-axis loads within the motor's rated torque range."},{"question":"What encoder type does the SH31002M11F1200 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. This provides absolute position at power-up without requiring a homing sequence, and the SinCos interface gives high-resolution analog feedback compatible with Schneider drives and third-party servo controllers supporting Hiperface."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002M11F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002M11F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}