{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002M11F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002M11F2000","canonicalUrl":"https://aoctrl.com/schneider/SH31002M11F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002M11F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31002M11F2000, three-phase, 1.1 kW continuous power, 9 N·m holding torque, IP54/IP65, absolute single-turn SinCos Hiperface encoder, rotatable right-angled connector.","salesMarkdown":"## Motor ratings that decide the drive match The SH31002M11F2000: This SH3 frame servo delivers 1.1 kW continuous power and 5.28 N·m nominal torque when fed from a 400 V three-phase supply. At 480 V three-phase the nominal torque holds at 5.28 N·m but the output power climbs to 1280 W — the speed ceiling lifts to 2400 rpm. On a 230 V single-phase line the same motor produces 5.5 N·m at 1000 rpm; on 115 V single-phase it drops to 5.62 N·m at 500 rpm. The peak stall torque is 18.3 N·m across the 115–480 V three-phase range, which sets the acceleration ceiling for the load. ## Encoder and feedback — what the drive expects The encoder is an absolute single-turn SinCos Hiperface type. That means the drive gets position at power-up without a homing move — the single-turn resolution covers one revolution. The SinCos analog tracks give the drive fine interpolation for velocity ripple control. The motor has 4 poles, so the electrical frequency at 2000 rpm is 66.7 Hz — well within the encoder bandwidth. ## Mounting and mechanical interface Flange size is 100 mm with a 95 mm centring collar and 3.5 mm collar depth. The shaft is 19 mm diameter with a parallel key 6 mm wide and 40 mm shaft length. Four mounting holes at 9 mm diameter on the flange. The rotatable right-angled connector lets the cable exit in any of four orientations — useful when the motor is shoehorned into a tight axis.","metaTitle":"Schneider Electric SH31002M11F2000 Servo Motor with Brake","metaDescription":"Schneider Electric SH31002M11F2000 servo motor with brake, 1.1 kW continuous power, 9 N·m holding torque, IP54/IP65, absolute encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"9.3 in (235.5 mm)","Inertia":"0.618 kg.cm² of brake 2.31 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"2.928 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"49.74 lbf.in (5.62 N.m) 115 V single phase 48.7 lbf.in (5.5 N.m) 230 V single phase 46.73 lbf.in (5.28 N.m) 400 V three phase 46.73 lbf.in (5.28 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.32 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1100 W","Mounting Support":"International standard flange","Sizing reference":"SH31002M","Back emf constant":"146 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"24.3 mH","Stator resistance":"8.6 Ohm","Maximum current Irms":"9.0 A","Nominal output power":"300 W 115 V single phase 580 W 230 V single phase 1090 W 400 V three phase 1280 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"9.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"2.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/743b678806299dae9874a8edf8503d12.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31002M11F2000/sh3-servomotor-100mm-2-stacks-high-torque-keyed-shaft-sincos-singleturn-128-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31002M11F2000/alternatives.json"},"ai":{"faq":[{"question":"What supply voltage and phase does SH31002M11F2000 need?","answer":"The motor is wound for three-phase operation. It runs on 115 V single-phase (derated to 300 W, 500 rpm), 230 V single-phase (580 W, 1000 rpm), 400 V three-phase (1090 W, 2000 rpm), or 480 V three-phase (1280 W, 2400 rpm) — the nominal torque stays near 5.28–5.62 N·m across all configurations."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002M11F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002M11F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}