{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002M11F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002M11F2200","canonicalUrl":"https://aoctrl.com/schneider/SH31002M11F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002M11F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH31002M11F2200 SH3 series servo motor with brake, 1.1 kW continuous power, 9 Nm holding torque, absolute single-turn SinCos Hiperface encoder, IP65, three-phase.","salesMarkdown":"## 1.1 kW servo with holding brake — vertical-axis ready The SH31002M11F2200 is a 1.1 kW continuous-power servo motor from Schneider Electric's SH3 series, fitted with a holding brake rated at 9 N.m (79.7 lbf.in) — enough to hold a vertical load on a gantry or Z-axis without a separate mechanical lock. The brake is integrated into the motor housing, so the overall length is 235.5 mm (9.3 in) — one package to bolt down and wire, not a separate brake module to bracket and align. ## Speed-torque map across supply voltages Nominal speed depends on the supply: 500 rpm on 115 V single-phase, 1000 rpm on 230 V single-phase, 2000 rpm on 400 V three-phase, and 2400 rpm on 480 V three-phase. The nominal torque stays in a tight band — 5.62 N.m at 115 V single-phase, 5.5 N.m at 230 V single-phase, and 5.28 N.m at both 400 V and 480 V three-phase — so the motor delivers consistent force across common line voltages. Continuous stall torque is 5.8 N.m (51.3 lbf.in) across the 115–480 V three-phase range, and peak stall torque reaches 18.3 N.m (162.0 lbf.in) — a 3.2× overload margin for short-duration acceleration or deceleration moves. Output power climbs with voltage: 300 W at 115 V single-phase, 580 W at 230 V single-phase, 1090 W at 400 V three-phase, and 1280 W at 480 V three-phase. The 1.1 kW continuous rating aligns with the 400 V three-phase figure. ## Absolute feedback and IP65 sealing The encoder is an absolute single-turn SinCos Hiperface type — it reports position at power-on without a homing move, which saves one axis cycle per start on a pick-and-place or rotary indexing station. IP65 on the motor body and shaft bushing, plus IP67 on the housing (per IEC 60034-5), means the motor withstands washdown spray and condensation — suitable for food-processing, packaging, or outdoor conveyor sections where hosing is routine. Electrical connection is via a straight connector or a rotatable right-angled connector — choose the right-angle version when the cable exit needs to tuck against a beam or panel wall to save clearance. No stock-holding claim — quoted per order.","metaTitle":"Schneider Electric SH31002M11F2200 Servo Motor with Brake","metaDescription":"Schneider SH31002M11F2200 servo motor with brake, 1.1 kW continuous, 9 Nm holding torque, IP65, absolute encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"9.3 in (235.5 mm)","Inertia":"0.618 kg.cm² of brake 0.0 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"2.928 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"49.74 lbf.in (5.62 N.m) 115 V single phase 48.7 lbf.in (5.5 N.m) 230 V single phase 46.73 lbf.in (5.28 N.m) 400 V three phase 46.73 lbf.in (5.28 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.32 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1100 W","Mounting Support":"International standard flange","Sizing reference":"SH31002M","Back emf constant":"146 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"70.2 mH","Stator resistance":"8.6 Ohm","Maximum current Irms":"9.0 A","Nominal output power":"300 W 115 V single phase 580 W 230 V single phase 1090 W 400 V three phase 1280 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"9.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"2.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f40607cafbbc7abed34fe1ddcf36bd11.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31002M11F2200/sh3-servomotor-100mm-2-stacks-high-torque-keyed-shaft-sincos-singleturn-128-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31002M11F2200/alternatives.json"},"ai":{"faq":[{"question":"What is the holding torque of the brake on SH31002M11F2200?","answer":"The holding brake delivers 9 N.m (79.7 lbf.in) of holding torque — sufficient to hold a vertical-axis load without a separate mechanical brake."},{"question":"What IP rating does the SH31002M11F2200 servo motor have?","answer":"IP65 on the motor body and shaft bushing, IP67 on the housing, per IEC 60034-5. Suitable for washdown environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002M11F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002M11F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}