{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002M12A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002M12A2200","canonicalUrl":"https://aoctrl.com/schneider/SH31002M12A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002M12A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31002M12A2200, 1.1 kW continuous, 5.28 Nm at 400 V three-phase, 2000 rpm, IP65, absolute multiturn SinCos Hiperface encoder, 100 mm flange, without brake.","salesMarkdown":"## Motor ratings across supply voltages — the selection matrix The SH31002M12A2200: This SH3 frame servo delivers different performance depending on the supply. At 400 V three-phase, nominal torque is 5.28 Nm at 2000 rpm, with nominal output power of 1090 W. On 480 V three-phase, the same torque holds at 5.28 Nm but output climbs to 1280 W at 2400 rpm. Single-phase 115 V drops torque to 5.62 Nm at 500 rpm and output to 300 W — so the drive supply voltage directly dictates the usable speed-torque envelope. Peak stall torque is 18.3 Nm across the 115-480 V three-phase range, with a 3-second peak current of 9.0 A. That gives you the acceleration headroom for short-duration moves without oversizing the drive. ## Encoder and drive pairing — the Hiperface interface The motor carries an absolute multiturn SinCos Hiperface encoder. That means it reports position on power-up without a homing move — the drive reads the absolute position from the encoder's multiturn count. Pair this motor with a Schneider Lexium drive that supports Hiperface; the SinCos analog tracks give fine velocity feedback down to standstill. Stator resistance is 8.6 Ω, inductance 24.3 mH — these feed the autotune routine in the drive for current loop gains. ## Physical fit — flange, shaft, and IP rating Mounting is a 100 mm international standard flange with a 95 mm centring collar and 9.0 mm mounting holes. The shaft is 19 mm diameter with a parallel key, 40 mm long — standard for this frame size. Overall length is 204.5 mm, so check your cavity depth before committing. IP65 on the motor body and shaft bushing, IP67 on the housing — conforming to IEC 60034-5. That means it handles washdown spray from any direction, but the shaft seal is the wet-end barrier; the connector O-ring on the straight or rotatable right-angle connector needs to be seated properly to maintain the rating. ## Continuous thermal limits and cooling Continuous stall torque is 5.8 Nm at 2.5 A across the 115-480 V range. Continuous power is 1100 W — that's the sustained output before the winding hits the 130 °C copper hot-spot temperature. Cooling is natural convection, so no fan or external airflow is required, but the motor must be mounted with free air circulation around the frame.","metaTitle":"Schneider Electric SH31002M12A2200 Servo Motor, 1.1 kW","metaDescription":"Schneider Electric SH31002M12A2200 SH3 servo motor, 1.1 kW continuous, 5.28 Nm at 400 V three-phase, IP65, absolute multiturn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.05 in (204.5 mm)","Inertia":"0.0 kg.cm² of brake 2.31 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"2.31 kg.cm²","Nominal torque":"49.74 lbf.in (5.62 N.m) 115 V single phase 48.7 lbf.in (5.5 N.m) 230 V single phase 46.73 lbf.in (5.28 N.m) 400 V three phase 46.73 lbf.in (5.28 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.32 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1100 W","Mounting Support":"International standard flange","Sizing reference":"SH31002M","Back emf constant":"146 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"24.3 mH","Stator resistance":"8.6 Ohm","Maximum current Irms":"9.0 A","Nominal output power":"300 W 115 V single phase 580 W 230 V single phase 1090 W 400 V three phase 1280 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"9.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"2.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e8bc54470f88eca912d1ae034c83eaee.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31002M12A2200/sh3-servomotor-100mm-2-stacks-high-torque-keyed-shaft-sincos-multiturn-128-no-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31002M12A2200/alternatives.json"},"ai":{"faq":[{"question":"What is the SH31002M12A2200's phase configuration?","answer":"It is a three-phase servo motor, but the performance varies by supply voltage: 115 V single-phase, 230 V single-phase, 400 V three-phase, and 480 V three-phase are all listed with different speed-torque curves."},{"question":"Does the SH31002M12A2200 include a holding brake?","answer":"No — this variant is specified without a holding brake. If you need a brake for vertical-axis holding, look at the SH3 series variants that include the brake option."},{"question":"What compliance documentation is available for this motor?","answer":"The motor carries IP65/IP67 protection per IEC 60034-5. The evidence does not list RoHS, REACH, UL, or CE certificates specifically, but as a current Schneider Electric production item, standard EU and UL declarations are typically included with the shipment — confirm at RFQ."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002M12A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002M12A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}