{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002M12F1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002M12F1100","canonicalUrl":"https://aoctrl.com/schneider/SH31002M12F1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002M12F1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, 1100 W continuous power, 9 N.m holding torque, IP65, absolute multiturn SinCos Hiperface encoder, 19 mm shaft with parallel key, 100 mm flange.","salesMarkdown":"## Speed profile across supply voltages The SH31002M12F1100: This motor delivers 500 rpm on 115 V single-phase, 1000 rpm on 230 V single-phase, 2000 rpm on 400 V three-phase, and 2400 rpm on 480 V three-phase — the nominal speed shifts with the supply rail, so the drive parameter set must match the line voltage at the cabinet. Nominal torque holds at 5.62 N.m on 115 V single-phase, dropping slightly to 5.5 N.m on 230 V single-phase, and settling at 5.28 N.m on both 400 V and 480 V three-phase supplies. ## Holding brake and mechanical interface The integrated holding brake delivers 9 N.m of holding torque — enough to secure a vertical-axis load on a gantry or robot arm without a separate brake resistor or external holding circuit. Shaft is 19 mm diameter with a parallel key, 40 mm shaft length, and 6 mm key width — fits standard coupling and pulley bores for the 100 mm flange size. ## Encoder and feedback loop Absolute multiturn SinCos Hiperface encoder provides position feedback without a home cycle on power-up — the drive knows the rotor position immediately, which cuts commissioning time on multi-axis machines. Back EMF constant is 146 V/krpm at 20 °C — this sets the voltage ceiling for the drive bus; a 480 V supply gives headroom for the 2400 rpm top speed without saturating the drive output stage. ## Environmental and thermal ratings IP65 protection on both the motor body and shaft bushing per IEC 60034-5 — the motor withstands washdown and dust ingress, making it suitable for food-and-bev or wet machining lines without a secondary cover. Natural convection cooling with a copper hot-spot limit of 130 °C — no fan means no moving parts to fail, but the thermal time constant is longer; cycle duty must respect the continuous stall torque of 5.8 N.m across the 115–480 V range.","metaTitle":"Schneider Electric SH31002M12F1100 Servo Motor with Brake","metaDescription":"Schneider Electric SH31002M12F1100 servo motor with brake, 1100 W continuous power, 9 N.m holding torque, IP65, absolute multiturn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"9.3 in (235.5 mm)","Inertia":"0.618 kg.cm² of brake 2.31 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"2.928 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"49.74 lbf.in (5.62 N.m) 115 V single phase 48.7 lbf.in (5.5 N.m) 230 V single phase 46.73 lbf.in (5.28 N.m) 400 V three phase 46.73 lbf.in (5.28 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.32 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1100 W","Mounting Support":"International standard flange","Sizing reference":"SH31002M","Back emf constant":"146 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"24.3 mH","Stator resistance":"8.6 Ohm","Maximum current Irms":"9.0 A","Nominal output power":"300 W 115 V single phase 580 W 230 V single phase 1090 W 400 V three phase 1280 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"9.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"2.5 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/2eeb4e0f93896c3ca816e2f5d0b32a7c.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH31002M12F1100/sh3-servomotor-100mm-2-stacks-high-torque-keyed-shaft-sincos-multiturn-128-brake-straight-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31002M12F1100/alternatives.json"},"ai":{"faq":[{"question":"What is the continuous power rating of SH31002M12F1100?","answer":"Continuous power is 1100 W, with nominal output power varying by supply: 300 W on 115 V single-phase, 580 W on 230 V single-phase, 1090 W on 400 V three-phase, and 1280 W on 480 V three-phase."},{"question":"What holding torque does the brake provide?","answer":"The holding brake delivers 9 N.m (79.7 lbf.in) of holding torque, sufficient to hold a vertical load on a stopped axis without external mechanical locking."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002M12F1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002M12F1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}