{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002P01A1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002P01A1200","canonicalUrl":"https://aoctrl.com/schneider/SH31002P01A1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002P01A1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31002P01A1200, 1900 W continuous, 100 mm flange, smooth shaft, absolute single-turn SinCos Hiperface encoder, IP65/IP67, without holding brake.","salesMarkdown":"## Three-phase winding, voltage-dependent torque curve The SH31002P01A1200 is a three-phase servo motor — it requires a three-phase drive output, not a single-phase input motor run off a VFD with derating. The nominal speed and torque shift with the supply voltage: at 400 V three-phase, nominal speed is 4000 rpm with 4.6 Nm torque; at 480 V three-phase, nominal speed climbs to 4800 rpm with 4.4 Nm torque. Continuous power is 1900 W, with a continuous stall torque of 5.8 Nm across the 115–480 V three-phase range. Peak stall torque reaches 18.3 Nm, but the drive must supply 17.1 A peak current to hit that — check the drive's peak current rating against the acceleration duty cycle. ## Encoder choice and brake absence Fitted with an absolute single-turn SinCos Hiperface encoder. Single-turn means the position reference resets every revolution — if the application needs multi-turn position tracking (e.g., a ball screw that travels more than one motor rev), this encoder won't retain absolute position across power cycles. Hiperface is an open standard, compatible with most Schneider drives and many third-party servo drives that support the protocol. ## Sealing and mounting envelope IP65 on the motor body and shaft bushing, IP67 on the housing per IEC 60034-5. The shaft bushing is the limiting seal — in washdown environments where water jets hit the shaft exit, the IP65 rating means it's splash-resistant but not submersible. The housing itself is IP67, so the main body can handle temporary immersion. Mounts on a 100 mm international standard flange with a 95 mm centring collar and 9 mm mounting holes. Overall length is 204.5 mm with a 19 mm smooth shaft extending 40 mm. The smooth shaft means no keyway — the load coupling must use a clamping or friction-fit method.","metaTitle":"Schneider Electric SH31002P01A1200 Servo Motor, 1900 W","metaDescription":"Schneider Electric SH31002P01A1200 SH3 servo motor, 1900 W continuous, 100 mm flange, IP65/IP67, absolute single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31002P01A1200","Length":"8.05 in (204.5 mm)","Inertia":"0.0 kg.cm² of brake 2.31 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"servo motor SH3 100 5,8Nm,nokey,single,nobrake,str.conn,IP65/IP67,6k RPM","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"1000 rpm 115 V single phase 2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"2.31 kg.cm²","Nominal torque":"48.7 lbf.in (5.5 N.m) 115 V single phase 46.02 lbf.in (5.2 N.m) 230 V single phase 40.7 lbf.in (4.6 N.m) 400 V three phase 38.9 lbf.in (4.4 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.21 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1900 W","Mounting Support":"International standard flange","Sizing reference":"SH31002P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"6.75 mH","Stator resistance":"2.4 Ohm","Maximum current Irms":"17.1 A","Nominal output power":"580 W 115 V single phase 1090 W 230 V single phase 1930 W 400 V three phase 2210 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"17.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"4.8 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/97776361aedd2bf22785f5ef94fd4e6a.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31002P01A1200/servo-motor-sh3-100-58nmnokeysinglenobrakestr-connip65-ip676k-rpm/"},"ai":{"faq":[{"question":"What is SH31002P01A1200's phase configuration?","answer":"Three-phase winding. It requires a three-phase servo drive output; single-phase input drives won't run this motor at full rated torque and speed."},{"question":"What compliance documentation does Schneider Electric provide for SH31002P01A1200?","answer":"The motor carries IP65/IP67 ratings conforming to IEC 60034-5. Standard Schneider documentation includes the CE declaration of conformity and the product data sheet covering electrical and mechanical specifications. RoHS and REACH compliance is standard for current-production SH3 series motors."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002P01A1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002P01A1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}