{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002P02F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002P02F2200","canonicalUrl":"https://aoctrl.com/schneider/SH31002P02F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002P02F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31002P02F2200, 1.9 kW continuous power, 100 mm flange, 19 mm smooth shaft, absolute multiturn SinCos Hiperface encoder, IP65.","salesMarkdown":"## Speed-torque envelope by supply voltage The SH31002P02F2200: This motor delivers different nominal speeds depending on the supply: 1000 rpm at 115 V single-phase, 2000 rpm at 230 V single-phase, 4000 rpm at 400 V three-phase, and 4800 rpm at 480 V three-phase. The nominal torque drops as voltage rises — from 5.5 N·m at 115 V single-phase down to 4.4 N·m at 480 V three-phase — so the application's available supply dictates the torque-speed curve you design to. Peak stall torque is 18.3 N·m across the 115–480 V three-phase range, giving a 3–4× overload margin over nominal for acceleration and emergency stops. Continuous stall torque sits at 5.8 N·m over the same range. ## Mounting and environmental fit The motor uses a 100 mm international standard flange (IEC 60034) with a 95 mm centring collar and 3.5 mm collar depth. Four 9 mm mounting holes on the flange face — standard bolt pattern for this frame size. Overall body length is 234.5 mm with a 40 mm smooth shaft, 19 mm diameter. The smooth shaft means no keyway — the load coupling must use a clamping or friction-fit method, not a keyed hub. IP65 on the motor body and shaft bushing, IP67 on the housing — suitable for washdown environments where the connector is properly mated. Cooling is natural convection, so no external fan or coolant lines needed. ## Encoder and electrical interface The absolute multiturn SinCos Hiperface encoder provides position feedback without a home cycle on power-up — the multiturn count tracks absolute position over multiple shaft revolutions. This eliminates the need for a reference run after a power loss or drive reset. Electrical connection options include a straight connector or a rotatable right-angled connector — the right-angle version helps in tight cable-tray routing where axial clearance is limited. Stator resistance is 2.4 Ω and inductance is 6.75 mH — these values set the electrical time constant and influence the drive's current-loop tuning parameters. The torque constant is 1.21 N·m/A at 120 °C copper temperature. The sizing reference SH31002P groups this motor into the SH3 family — the same frame size and flange, with variants for different windings, encoder types, and brake options.","metaTitle":"Schneider SH31002P02F2200 Servo Motor with Brake, 1.9 kW","metaDescription":"Schneider Electric SH31002P02F2200 servo motor with holding brake, 1.9 kW continuous, 100 mm flange, IP65, absolute multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31002P02F2200","Length":"9.2 in (234.5 mm)","Inertia":"0.618 kg.cm² of brake 2.31 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 100mm, 2 stacks, smooth Shaft, SinCos Multiturn 128, Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"1000 rpm 115 V single phase 2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"2.928 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"48.7 lbf.in (5.5 N.m) 115 V single phase 46.02 lbf.in (5.2 N.m) 230 V single phase 40.7 lbf.in (4.6 N.m) 400 V three phase 38.9 lbf.in (4.4 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.21 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1900 W","Mounting Support":"International standard flange","Sizing reference":"SH31002P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"6.75 mH","Stator resistance":"2.4 Ohm","Maximum current Irms":"17.1 A","Nominal output power":"580 W 115 V single phase 1090 W 230 V single phase 1930 W 400 V three phase 2210 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"17.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"4.8 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,313.90","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e8cf44878fbedc14dc44b5005abf9d98.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31002P02F2200/sh3-servomotor-100mm-2-stacks-smooth-shaft-sincos-multiturn-128-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What supply voltages and speeds does SH31002P02F2200 support?","answer":"The motor runs at 1000 rpm on 115 V single-phase, 2000 rpm on 230 V single-phase, 4000 rpm on 400 V three-phase, and 4800 rpm on 480 V three-phase. Nominal torque varies from 5.5 N·m down to 4.4 N·m across these supply configurations."},{"question":"What is the holding brake torque on this servo motor?","answer":"The holding brake provides 9 N·m of holding torque. The brake adds 0.618 kg·cm² to the rotor inertia."},{"question":"What encoder type does SH31002P02F2200 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder, which provides absolute position feedback over multiple revolutions without a homing cycle."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002P02F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002P02F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}