{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002P0AF3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002P0AF3000","canonicalUrl":"https://aoctrl.com/schneider/SH31002P0AF3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002P0AF3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31002P0AF3000, three-phase, 1930 W nominal output at 400/480 V, 100 mm flange, absolute single-turn Hiperface DSL encoder, smooth shaft, IP65.","salesMarkdown":"## Why the holding brake and encoder choice matter for your axis The SH31002P0AF3000 carries a holding brake rated at 9 N.m — enough to lock a vertical load or keep a stopped axis from drifting when the drive is disabled. That brake pull-in power is 12 W, so budget a 24 VDC supply capable of that inrush if the brake is released via a separate contactor. The absolute single-turn Hiperface DSL encoder means the drive knows the motor shaft position the instant power comes on — no homing sequence, no reference run. For a machine that must resume position after a power cycle, that saves a cycle-time hit on every restart. ## Speed and torque across supply voltages Nominal speed depends on the supply: 2000 rpm at 230 V single-phase, 4000 rpm at 400 V three-phase, 4800 rpm at 480 V three-phase. If your line runs 400 V three-phase, you get the full 1930 W nominal output; on 230 V single-phase that drops to 1090 W. Make sure the drive feeding this motor is rated for the voltage you actually have on the bus. Continuous stall torque is 5.8 N.m across the 115-480 V three-phase range, and peak stall torque hits 18.3 N.m — useful for short acceleration bursts. The torque constant is 1.21 N.m/A at 120 °C copper temperature, so the drive current limit should be set to protect the motor windings during sustained overloads. ## Mounting and environmental fit The motor flange is 100 mm with a 95 mm centring collar and 9 mm mounting holes — standard IEC frame that mates with common gearboxes and mounting brackets. The smooth shaft (19 mm diameter, 40 mm length) means the coupling must use a clamping hub or set-screw; no keyway to transmit torque directly. IP65 on the motor body with IP54 at the shaft bushing (without the shaft seal ring). In washdown or wet environments, fit the optional shaft seal to keep moisture out of the bearing cavity. Natural convection cooling — no fan, so the motor relies on the mounting surface and ambient airflow to shed heat.","metaTitle":"Schneider Electric SH31002P0AF3000 Servo Motor with Brake","metaDescription":"Schneider Electric SH31002P0AF3000 servo motor with holding brake, 1930 W at 400 V three-phase, absolute single-turn Hiperface DSL encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"9.3 in (235.5 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"2.928 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"46.02 lbf.in (5.2 N.m) 230 V single phase 40.7 lbf.in (4.6 N.m) 400 V three phase 38.9 lbf.in (4.4 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.21 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1930 W","Mounting Support":"International standard flange","Sizing reference":"SH31002P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"13.5 mH","Stator resistance":"2.4 Ohm","Brake pull-in power":"12 W","Maximum current Irms":"17.1 A","Nominal output power":"1090 W 230 V single phase 1930 W 400 V three phase 1930 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"300 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"2240 N 1000 rpm 1780 N 2000 rpm 1550 N 3000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"4.8 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/31c6d1f0a2c7945667a1ecf0434c9163.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31002P0AF3000/sh3-servomotor-100mm-2-stacks-smooth-shaft-singleturn-dsl-18bit-brake-onemotorcable-straight-m23-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31002P0AF3000/alternatives.json"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH31002P0AF3000?","answer":"Submit an RFQ against your BOM quantity."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002P0AF3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002P0AF3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}