{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002P0BF3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002P0BF3000","canonicalUrl":"https://aoctrl.com/schneider/SH31002P0BF3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002P0BF3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH31002P0BF3000 servo motor, SH3 series, three-phase, 1930 W continuous power, 4000 rpm at 400 V, holding brake, absolute multiturn Hiperface DSL encoder, IP65, 9.3 in length.","salesMarkdown":"## Motor ratings that shift with your supply voltage The SH31002P0BF3000 is a three-phase servo motor from Schneider's SH3 series, and its output speed and torque depend directly on what voltage you feed it. At 400 V three-phase it spins 4000 rpm delivering 4.6 N.m nominal torque; feed it 480 V three-phase and it reaches 4800 rpm with 4.4 N.m. On 230 V single-phase you get 2000 rpm and 5.2 N.m. That voltage-dependent curve means the motor's continuous power settles at 1930 W on either 400 V or 480 V three-phase supply, but drops to 1090 W on single-phase 230 V. ## Holding brake and encoder — what they mean for a build This motor ships with a holding brake rated at 9 N.m holding torque — that's 79.7 lbf.in, enough to keep a vertical-axis load from dropping when the drive is off. The brake pulls 12 W to release, so factor that into your 24 VDC control supply budget. The encoder is an absolute multiturn Hiperface DSL, which means you get position feedback over a single cable pair without a separate battery backup for multiturn counts. It's a straight quicklock connector — no right-angle adapter needed. ## IP65 and shaft details for washdown or dusty environments The motor body carries IP65 per IEC 60034-5, so it handles hose-down and dust ingress. The shaft bushing without the shaft seal ring drops to IP54 — if you need full IP65 at the shaft exit, fit the seal ring. The shaft is 19 mm diameter, smooth (no keyway), 40 mm long. Maximum radial force at 3000 rpm is 1840 N, and axial force limit is 300 N. Cooling is natural convection — no fan, so keep air circulation around the motor in the cabinet layout.","metaTitle":"Schneider SH31002P0BF3000 Servo Motor with Brake, 1930 W","metaDescription":"Schneider Electric SH31002P0BF3000 servo motor with holding brake, 1930 W continuous power, 4000 rpm at 400 V three-phase.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"9.3 in (235.5 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"2.928 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"46.02 lbf.in (5.2 N.m) 230 V single phase 40.7 lbf.in (4.6 N.m) 400 V three phase 38.9 lbf.in (4.4 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.21 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1930 W","Mounting Support":"International standard flange","Sizing reference":"SH31002P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"13.5 mH","Stator resistance":"2.4 Ohm","Brake pull-in power":"12 W","Maximum current Irms":"17.1 A","Nominal output power":"1090 W 230 V single phase 1930 W 400 V three phase 1930 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"300 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"1840 N 3000 rpm 2660 N 1000 rpm 2110 N 2000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"4.8 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/83ebfbfe5dccdc0ad929fd44688d514d.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31002P0BF3000/sh3-servomotor-100mm-2-stacks-smooth-shaft-multiturn-dsl-18bit-brake-onemotorcable-straight-m23-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31002P0BF3000/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy SH31002P0BF3000 and get a price?","answer":"Send your BOM quantity for a current price and availability confirmation — no stock-holding claim, but the supply chain is active."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002P0BF3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002P0BF3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}