{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002P11F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002P11F1200","canonicalUrl":"https://aoctrl.com/schneider/SH31002P11F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002P11F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31002P11F1200, three-phase, 100 mm flange, 4.0 poles, with holding brake, absolute single-turn SinCos Hiperface encoder, IP65/IP67, 1900 W continuous power, 9.2 in (234.5 mm) length.","salesMarkdown":"## 100 mm flange, 4-pole, with holding brake The SH31002P11F1200 is a 100 mm flange-size servo motor from the SH3 series, a 4-pole three-phase design with an integral holding brake. The brake delivers 9 N.m holding torque — enough to hold a vertical axis load at rest without a separate mechanical brake, simplifying the safety chain for a pick-and-place or gantry application. Rated continuous power is 1900 W, but the usable torque and speed depend on the supply voltage. At 400 V three-phase the nominal speed is 4000 rpm with 4.6 N.m nominal torque; at 480 V three-phase it reaches 4800 rpm with 4.4 N.m. The peak stall torque is 18.3 N.m across the 115–480 V three-phase range, giving the headroom for acceleration transients. ## Encoder, IP rating, and electrical connection The feedback device is an absolute single-turn SinCos Hiperface encoder — a standard interface for drive-based commutation and position control. No external battery backup is needed for the single-turn position on power-up, which simplifies the cabling and reduces a maintenance point. IP65 on the motor body and shaft bushing, IP67 on the housing — both per IEC 60034-5. The shaft bushing seal is the wet-end barrier; the housing seal protects the stator windings from washdown. This motor is suitable for food-and-beverage or washdown zones where a standard IP54 servo would accumulate moisture ingress over time. Two electrical connection options are listed: a rotatable right-angled connector and a straight connector. The rotatable version is useful when the cable exit direction must be adjusted on-site to clear a panel wall or cable tray without adding a right-angle adapter. ## Mechanical interface and mounting The motor mounts via an international standard flange (100 mm), with four 9.0 mm mounting holes and a 3.5 mm centring collar depth. The shaft is 19 mm diameter with a parallel key, 40 mm shaft length. Overall motor length is 234.5 mm — this is the body-only dimension; the connector adds to the installed length. Natural convection cooling — no external fan or forced-air duct required. The thermal limit is set by the copper hot-spot temperature of 130 °C. The stator inductance is 6.75 mH and resistance is 2.4 Ohm, which sets the electrical time constant and influences the current-loop tuning at the drive. Maximum radial force at the shaft is derated with speed: 990 N at 1000 rpm, 620 N at 4000 rpm. Maximum axial force is 160 N. These limits govern the permissible belt tension or direct-coupling overhung load — exceeding them shortens bearing life.","metaTitle":"Schneider SH31002P11F1200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31002P11F1200 servo motor, 100mm flange, 4-pole, 1900W continuous, with holding brake and Hiperface encoder. IP65/IP67 rated.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31002P11F1200","Length":"9.2 in (234.5 mm)","Inertia":"0.618 kg.cm² of brake 2.31 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 100mm, 2 stacks, keyed Shaft, SinCos Singleturn 128, Brake, straight, IP65/67","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"1000 rpm 115 V single phase 2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"2.928 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"48.7 lbf.in (5.5 N.m) 115 V single phase 46.02 lbf.in (5.2 N.m) 230 V single phase 40.7 lbf.in (4.6 N.m) 400 V three phase 38.9 lbf.in (4.4 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.21 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1900 W","Mounting Support":"International standard flange","Sizing reference":"SH31002P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"6.75 mH","Stator resistance":"2.4 Ohm","Maximum current Irms":"17.1 A","Nominal output power":"580 W 115 V single phase 1090 W 230 V single phase 1930 W 400 V three phase 2210 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"17.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"4.8 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ba4ab9c0a787183389377b99d1647edd.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH31002P11F1200/sh3-servomotor-100mm-2-stacks-keyed-shaft-sincos-singleturn-128-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"What is the holding torque of the brake on SH31002P11F1200?","answer":"The holding brake delivers 9 N.m (79.7 lbf.in) of holding torque, sufficient to hold a vertical-axis load at rest without a separate mechanical brake."},{"question":"What encoder type does SH31002P11F1200 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. The single-turn resolution means the absolute position is known at power-up without a homing cycle, but the position is limited to one revolution — multi-turn applications require a separate multi-turn encoder or a drive that tracks turns."},{"question":"What is the IP rating of SH31002P11F1200?","answer":"The motor body and shaft bushing are IP65-rated, and the housing is IP67-rated, both per IEC 60034-5. This means the motor is protected against water jets (IP65) and temporary immersion (IP67) — suitable for washdown environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002P11F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002P11F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}