{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002P12F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002P12F1200","canonicalUrl":"https://aoctrl.com/schneider/SH31002P12F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002P12F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH31002P12F1200 SH3 series servo motor with holding brake, 1900 W continuous power, 100 mm flange, IP65/IP67, absolute multiturn SinCos Hiperface encoder.","salesMarkdown":"## Power and speed profile across supply voltages The SH31002P12F1200: This SH3 frame servo motor delivers nominal torque that shifts with the supply: 48.7 lbf.in (5.5 N.m) on 115 V single-phase, down to 38.9 lbf.in (4.4 N.m) on 480 V three-phase. The nominal speed climbs from 1000 rpm at 115 V single-phase to 4800 rpm at 480 V three-phase — so the same motor body covers a wide speed range depending on the drive and line voltage. Continuous power output follows the same pattern: 580 W on 115 V single-phase, 1090 W on 230 V single-phase, 1930 W on 400 V three-phase, and 2210 W on 480 V three-phase. The 1900 W continuous power rating is the headline figure for three-phase operation at nominal conditions. ## Torque capability and brake for vertical loads Peak stall torque reaches 162.0 lbf.in (18.3 N.m) across the 115-480 V three-phase range, with continuous stall torque at 51.3 lbf.in (5.8 N.m). The holding brake adds 79.7 lbf.in (9 N.m) of static holding torque — enough to secure a vertical-axis load without power, eliminating the need for an external brake resistor or mechanical lock. The absolute multiturn SinCos Hiperface encoder provides position feedback without a homing cycle after power loss — critical for applications where the axis must resume from the last commanded position. Combined with the brake, this motor is suited for Z-axis or gantry lifts where both position retention and restart accuracy matter. ## Environmental protection and mounting IP65 on the motor body and shaft bushing, IP67 on the housing — both conforming to IEC 60034-5. This means the motor withstands hose-down cleaning and dust ingress, making it suitable for food processing, packaging, or washdown zones. The rotatable right-angle connector and straight connector options let the cable exit adapt to tight cabinet layouts. Mounting uses an international standard flange with a 100 mm (3.9 in) flange size and 9.0 mm mounting holes. The centring collar depth is 3.5 mm (0.1 in) — confirm the mating pilot depth on the gearbox or machine frame to avoid axial interference.","metaTitle":"Schneider Electric SH31002P12F1200 Servo Motor with Brake","metaDescription":"Schneider Electric SH31002P12F1200 servo motor with holding brake, 1900 W continuous power, 100 mm flange, IP65/IP67. Absolute multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH31002P12F1200","Length":"9.2 in (234.5 mm)","Inertia":"0.618 kg.cm² of brake 2.31 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 100mm, 2 stacks, keyed Shaft, SinCos Multiturn 128, Brake, straight, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"1000 rpm 115 V single phase 2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"2.928 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"48.7 lbf.in (5.5 N.m) 115 V single phase 46.02 lbf.in (5.2 N.m) 230 V single phase 40.7 lbf.in (4.6 N.m) 400 V three phase 38.9 lbf.in (4.4 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.21 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1900 W","Mounting Support":"International standard flange","Sizing reference":"SH31002P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"6.75 mH","Stator resistance":"2.4 Ohm","Maximum current Irms":"17.1 A","Nominal output power":"580 W 115 V single phase 1090 W 230 V single phase 1930 W 400 V three phase 2210 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"17.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"4.8 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/4dce0d8afcfc696dc405990a8e9358f9.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31002P12F1200/sh3-servomotor-100mm-2-stacks-keyed-shaft-sincos-multiturn-128-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"What is the maximum current draw for SH31002P12F1200?","answer":"The maximum continuous current Irms is 17.1 A, with the same 17.1 A for the 3-second peak output. This sets the drive current rating requirement."},{"question":"What IP rating does this motor have?","answer":"IP65 on the motor body and shaft bushing, IP67 on the housing — all conforming to IEC 60034-5. Suitable for washdown and dusty environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002P12F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002P12F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}