{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31002P1BF3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31002P1BF3000","canonicalUrl":"https://aoctrl.com/schneider/SH31002P1BF3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31002P1BF3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31002P1BF3000, three phase, 1930 W continuous power, 5.2 Nm nominal torque, absolute multiturn Hiperface DSL encoder, IP65, 100 mm flange.","salesMarkdown":"## Torque and power across supply voltages The SH31002P1BF3000: This servo motor delivers rated performance that depends on the input voltage. On three-phase 400 V supply, nominal output power is 1930 W with nominal torque of 4.6 Nm; at 480 V three-phase, power holds at 1930 W but torque drops to 4.4 Nm. On single-phase 230 V, nominal output is 1090 W with 5.2 Nm torque. Peak stall torque reaches 18.3 Nm across the 115...480 V three-phase range, while continuous stall torque is 5.8 Nm under the same supply conditions — the motor can handle short-duration overloads roughly 3× the continuous rating. ## Encoder, brake, and feedback loop integration The absolute multiturn Hiperface DSL encoder provides position feedback over a single cable pair, eliminating separate feedback wiring and reducing cable drag-chain complexity. This is a digital serial protocol — the drive controller must support Hiperface DSL to interpret the position data. Holding brake is integrated, rated at 9 Nm holding torque with a pull-in power of 12 W. The brake engages when power is removed, making this motor suitable for vertical-axis applications where the load must be held at standstill without servo current. ## Mounting, shaft, and environmental fit Motor flange size is 100 mm (3.9 in) with an international standard flange pattern — centring collar diameter 95 mm, depth 3.5 mm, four mounting holes on a 9.0 mm diameter. The shaft is 19 mm diameter, 40 mm long, with a parallel key (key width 6 mm). The shaft bushing without seal ring drops to IP54, so an external shaft seal should be considered if coolant spray directly hits the shaft exit. Cooling is by natural convection — no external fan or forced air required, but the 1930 W continuous rating assumes free airflow around the motor frame. Maximum radial force at the shaft is 2660 N at 1000 rpm, dropping to 1840 N at 3000 rpm; maximum axial force is 300 N. ## Electrical parameters for drive sizing Stator resistance is 2.4 Ohm and inductance is 13.5 mH — these values define the motor's electrical time constant and influence the drive's current-loop tuning. Maximum continuous current Irms is 17.1 A; the torque constant is 1.21 Nm/A at 120 °C copper temperature. ## Connector options and cable routing Two electrical connection options are available: a rotatable right-angled connector or a quicklock straight connector. The rotatable version allows the cable exit to be oriented in 90° increments after installation — useful when the motor is mounted in a tight cabinet corner. Both connector types are single-cable solutions carrying power and feedback on the same hybrid cable when using Hiperface DSL.","metaTitle":"Schneider Electric SH31002P1BF3000 Servo Motor with Brake","metaDescription":"Schneider Electric SH31002P1BF3000 servo motor with brake, 1930 W continuous power, absolute multiturn Hiperface DSL encoder, IP65, active production, sourced","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"9.3 in (235.5 mm)","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase","Rotor inertia":"2.928 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"46.02 lbf.in (5.2 N.m) 230 V single phase 40.7 lbf.in (4.6 N.m) 400 V three phase 38.9 lbf.in (4.4 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.21 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1930 W","Mounting Support":"International standard flange","Sizing reference":"SH31002P","Back emf constant":"77 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"162.0 lbf.in (18.3 N.m) 115...480 V three phase","Stator inductance":"13.5 mH","Stator resistance":"2.4 Ohm","Brake pull-in power":"12 W","Maximum current Irms":"17.1 A","Nominal output power":"1090 W 230 V single phase 1930 W 400 V three phase 1930 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"300 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"51.3 lbf.in (5.8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"2110 N 2000 rpm 1840 N 3000 rpm 2660 N 1000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"4.8 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/b2e823e97a10afa8ffc7a73b9469b86c.pdf","sourceUrl":"https://www.se.com/us/en/product/SH31002P1BF3000/sh3-omc-motor-100mm-2-st-ip65-54-keyed-sh-dsl-multi-turn-str-conn-m23-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31002P1BF3000/alternatives.json"},"ai":{"faq":[{"question":"What is SH31002P1BF3000's listed phase and key electrical ratings?","answer":"It is a three-phase servo motor. Nominal output power is 1930 W on 400 V or 480 V three-phase supply, with nominal torque of 4.6 Nm at 400 V and 4.4 Nm at 480 V. Maximum continuous current is 17.1 A."},{"question":"What encoder type does SH31002P1BF3000 use?","answer":"It uses an absolute multiturn Hiperface DSL encoder. This digital protocol communicates position over a single cable pair and requires a drive controller that supports Hiperface DSL."},{"question":"What is the holding torque of the brake on SH31002P1BF3000?","answer":"The integrated holding brake provides 9 Nm of holding torque with a pull-in power of 12 W. It engages when power is removed, suitable for vertical-axis load holding."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31002P1BF3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31002P1BF3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}