{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003M01F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003M01F2000","canonicalUrl":"https://aoctrl.com/schneider/SH31003M01F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003M01F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31003M01F2000, 1500 W continuous power, 100 mm flange, 19 mm smooth shaft, absolute single-turn SinCos Hiperface encoder, IP54/IP65.","salesMarkdown":"## Motor ratings across supply voltages The SH31003M01F2000 delivers different speed and torque depending on the supply. At 400 V three-phase, nominal speed is 2000 rpm with 7 N.m nominal torque and 1470 W output power. On 480 V three-phase, speed reaches 2400 rpm with 6.76 N.m torque and 1700 W output. For single-phase 230 V, nominal speed drops to 1000 rpm at 7.5 N.m and 790 W; at 115 V single-phase, it runs 500 rpm at 7.8 N.m and 410 W. Peak stall torque is 28.3 N.m across the 115–480 V three-phase range, and continuous stall torque holds at 8 N.m — the motor can deliver short bursts of high torque for acceleration without overheating. ## Holding brake and encoder — what they mean for fit The integrated holding brake delivers 9 N.m holding torque — essential for vertical-axis applications where the load must stay put when power is removed. The brake is factory-fitted, so no field assembly is needed. The absolute single-turn SinCos Hiperface encoder provides position feedback without a home cycle on power-up — the drive knows the rotor position immediately. This encoder type is common on Schneider Lexium drives; confirm the drive model supports Hiperface protocol before pairing. ## Physical integration and environmental sealing The motor uses a 100 mm international standard flange (3.9 in) with a 19 mm smooth shaft and 6 mm keyway — fits standard mounting patterns for this frame size. Overall length is 271.5 mm (10.7 in), which includes the connector and brake housing. IP rating depends on the shaft seal configuration: IP54 with shaft bushing and no shaft seal ring, or IP65 with the shaft bushing seal installed. The motor body itself is IP65-rated per IEC 60034-5. For washdown environments, specify the shaft seal option. The rotatable right-angled connector allows the cable exit to be oriented in 90° increments — useful when routing cables in tight control cabinets or along machine frames. ## Electrical parameters for drive tuning Stator resistance is 5.3 Ω and inductance is 17.4 mH — these values go into the drive's auto-tuning routine for current-loop gains. The torque constant is 2.35 N.m/A at 120 °C copper temperature, and the back EMF constant is 148 V/krpm at 20 °C — both needed for velocity-loop calibration. Maximum continuous current is 14.7 A RMS, with a 3-second peak of the same value — the drive's continuous current rating should match or exceed this to avoid current-limiting during sustained operation. ## Sourcing and lifecycle — current production No direct replacement or cross-reference is needed; this is the active order code for the SH3 1500 W servo motor with brake, 100 mm flange, and Hiperface encoder.","metaTitle":"Schneider Electric SH31003M01F2000 Servo Motor with Brake","metaDescription":"Schneider Electric SH31003M01F2000 SH3 servo motor with holding brake, 1500 W continuous power, 100 mm flange, absolute single-turn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10.7 in (271.5 mm)","Inertia":"0.618 kg.cm² of brake 3.22 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"3.838 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"69.04 lbf.in (7.8 N.m) 115 V single phase 66.4 lbf.in (7.5 N.m) 230 V single phase 62.0 lbf.in (7 N.m) 400 V three phase 59.83 lbf.in (6.76 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.35 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1500 W","Mounting Support":"International standard flange","Sizing reference":"SH31003M","Back emf constant":"148 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"17.4 mH","Stator resistance":"5.3 Ohm","Maximum current Irms":"14.7 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1470 W 400 V three phase 1700 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"14.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.4 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/8cb41f5daa29ad821e8bcc7b4d4018dc.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31003M01F2000/sh3-servomotor-100mm-3-stacks-high-torque-smooth-shaft-sincos-singleturn-128-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31003M01F2000/alternatives.json"},"ai":{"faq":[{"question":"What encoder type does the SH31003M01F2000 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. This provides absolute position within one revolution and sinusoidal commutation signals — compatible with drives that support the Hiperface protocol."},{"question":"What is the holding brake torque on this motor?","answer":"The holding brake delivers 9 N.m (79.7 lbf.in) of holding torque. This is sufficient to hold vertical loads or prevent shaft rotation when the drive is disabled."},{"question":"What IP rating does the SH31003M01F2000 have?","answer":"The motor body is rated IP65 per IEC 60034-5. With the shaft bushing and no shaft seal ring, the assembly is IP54; with the shaft bushing seal installed, it achieves IP65 at the shaft exit."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003M01F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003M01F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}