{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003M01F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003M01F2200","canonicalUrl":"https://aoctrl.com/schneider/SH31003M01F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003M01F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31003M01F2200, 1.5 kW continuous power, 100 mm flange, three-phase, 8 N·m holding torque, IP65/IP67, absolute single-turn SinCos Hiperface encoder.","salesMarkdown":"## 1.5 kW at the shaft — voltage-dependent speed and torque The SH31003M01F2200 is a 1.5 kW continuous-power servo motor from the SH3 family, with a 100 mm flange and a holding brake rated 9 N·m. Its nominal speed and torque shift with the supply voltage: 500 rpm at 115 V single-phase, 1000 rpm at 230 V single-phase, 2000 rpm at 400 V three-phase, and 2400 rpm at 480 V three-phase. Nominal torque follows a similar curve — 7.8 N·m at 115 V, dropping to 6.76 N·m at 480 V. This voltage-dependent performance means the same motor frame covers both low-voltage commissioning and full-line-speed production — useful when a machine ships to regions with different mains standards and you want one BOM position for the motor. ## Absolute feedback and sealed construction Encoder is absolute single-turn SinCos Hiperface — no homing sequence on power-up, position is known immediately. The motor carries IP65 on the body and shaft bushing, IP67 on the housing per IEC 60034-5, so it handles washdown environments without a secondary cover. Cooling is natural convection — no fan, no forced-air requirement. The smooth shaft (no keyway) and the 19 mm diameter with 40 mm length give a standard coupling interface for most servo applications. Peak stall torque is 28.3 N·m across the 115–480 V three-phase range, with a 14.7 A peak current limit. The holding brake locks the shaft at 9 N·m when power is removed — enough to hold a vertical axis load without a counterbalance. ## Sourcing — active production, quoted per BOM Sourced through independent distribution; quantities are quoted against the BOM line.","metaTitle":"Schneider SH31003M01F2200 Servo Motor with Brake, 1.5 kW","metaDescription":"Schneider Electric SH31003M01F2200 SH3 servo motor with holding brake, 1.5 kW continuous, 8 N·m stall torque, IP65/IP67, absolute encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10.7 in (271.5 mm)","Inertia":"0.618 kg.cm² of brake 3.22 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"3.838 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"69.04 lbf.in (7.8 N.m) 115 V single phase 66.4 lbf.in (7.5 N.m) 230 V single phase 62.0 lbf.in (7 N.m) 400 V three phase 59.83 lbf.in (6.76 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.35 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1500 W","Mounting Support":"International standard flange","Sizing reference":"SH31003M","Back emf constant":"148 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"17.4 mH","Stator resistance":"5.3 Ohm","Maximum current Irms":"14.7 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1470 W 400 V three phase 1700 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"14.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.4 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7119de7760e599ab27d19f0b54122877.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31003M01F2200/sh3-servomotor-100mm-3-stacks-high-torque-smooth-shaft-sincos-singleturn-128-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31003M01F2200/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003M01F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003M01F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}