{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003M02A1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003M02A1200","canonicalUrl":"https://aoctrl.com/schneider/SH31003M02A1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003M02A1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31003M02A1200, 1500 W continuous power, three-phase, IP65 motor, IP67 housing, absolute multiturn SinCos Hiperface encoder, 100 mm flange.","salesMarkdown":"## 1500 W continuous power — speed and torque across supply voltages The SH31003M02A1200 delivers 1500 W continuous power from a three-phase supply, with nominal speed ranging from 500 rpm at 115 V single phase up to 2400 rpm at 480 V three phase. This voltage-dependent speed profile means the motor's usable speed range shifts with the line supply — a 400 V three-phase line gives 2000 rpm nominal, while a 480 V line pushes to 2400 rpm. Nominal torque also varies by supply: 7.8 N.m at 115 V single phase, dropping to 6.76 N.m at 480 V three phase. The peak stall torque hits 28.3 N.m across the 115–480 V three-phase range, giving headroom for acceleration spikes during cycle starts. ## Encoder feedback and mechanical interface An absolute multiturn SinCos Hiperface encoder provides position feedback — the multiturn count tracks absolute position across power cycles, eliminating homing routines on restart. This matters for applications where the machine must resume from the last commanded position after a power loss or emergency stop. No holding brake is fitted on this variant, so the load must be held by external means (mechanical brake or drive holding torque) when power is removed. The electrical connection uses a rotatable right-angled or straight connector, giving flexibility in cable routing within a cabinet or cable track. ## Environmental sealing and cooling The motor carries IP65 protection on the motor body and shaft bushing, with IP67 on the housing per IEC 60034-5. This means it withstands washdown environments — suitable for food processing, packaging, or any line where hose-down cleaning is routine. The shaft bushing seal is the critical wet-end barrier; the housing seal protects the encoder and winding connections. Cooling is by natural convection — no external fan or forced air required. The stator resistance is 5.3 Ohm with inductance 17.4 mH, and the continuous stall current is 3.4 A at 8 N.m stall torque. The thermal limit is set by the copper hot temperature of 130 °C. No pin-compatible direct replacement exists within the SH3 series; the sizing reference SH31003M defines the frame and winding, and the M02A1200 suffix encodes the specific encoder and connector variant. For a BOM freeze, confirm the encoder type (Hiperface) and connector orientation against the existing line before committing.","metaTitle":"Schneider Electric SH31003M02A1200 Servo Motor, 1500 W","metaDescription":"Schneider Electric SH31003M02A1200 servo motor, 1500 W continuous power, 7.8 N.m torque at 115 V single phase. Absolute multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"9.5 in (240.5 mm)","Inertia":"0.0 kg.cm² of brake 3.22 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"3.22 kg.cm²","Nominal torque":"69.04 lbf.in (7.8 N.m) 115 V single phase 66.4 lbf.in (7.5 N.m) 230 V single phase 62.0 lbf.in (7 N.m) 400 V three phase 59.83 lbf.in (6.76 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.35 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1500 W","Mounting Support":"International standard flange","Sizing reference":"SH31003M","Back emf constant":"148 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"17.4 mH","Stator resistance":"5.3 Ohm","Maximum current Irms":"14.7 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1470 W 400 V three phase 1700 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"14.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.4 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/b22e4d628cb14cbb0966edb4400d0fb0.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31003M02A1200/sh3-servomotor-100mm-3-stacks-high-torque-smooth-shaft-sincos-multiturn-128-no-brake-straight-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31003M02A1200/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003M02A1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003M02A1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}