{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003M02A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003M02A2000","canonicalUrl":"https://aoctrl.com/schneider/SH31003M02A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003M02A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH31003M02A2000 SH3 series servo motor, 1500 W continuous power, 7.8 Nm nominal torque at 115 V single phase, 6.76 Nm at 480 V three phase, 2400 rpm at 480 V, absolute multiturn SinCos Hiperface encoder, smooth shaft, IP65, without holding brake.","salesMarkdown":"## Supply voltage defines the speed-torque envelope The SH31003M02A2000: This SH3 servo motor delivers 1500 W continuous power, but the nominal speed and torque depend entirely on the supply voltage feeding the drive. At 115 V single phase you get 500 rpm and 7.8 Nm; at 480 V three phase the speed climbs to 2400 rpm while torque drops to 6.76 Nm. The peak stall torque across the 115...480 V three-phase range is 28.3 Nm — that's the short-term acceleration ceiling. The torque constant is 2.35 Nm/A at 120 °C copper temperature, and the continuous stall current is 3.4 A. The 3-second peak current is 14.7 A — the drive must be sized to deliver this for acceleration without tripping. ## Encoder and feedback — no homing needed The absolute multiturn SinCos Hiperface encoder means the drive knows the rotor position immediately on power-up — no homing sequence, no reference run. This saves cycle time on machines that power-cycle between shifts. The back EMF constant is 148 V/krpm at 20 °C — match this to the drive's DC bus voltage ceiling to avoid overvoltage at high speed. ## Mounting and mechanical fit The motor flange is 100 mm (3.9 in) with a 95 mm centring collar and 9 mm mounting holes — standard international flange pattern. The smooth shaft is 19 mm diameter, 40 mm long, with a 6 mm keyway. No holding brake is fitted, so the load must hold position without motor brake torque. The electrical connection is a rotatable right-angled connector — the cable exit direction can be adjusted after the motor is bolted down, which helps in tight cabinets. The IP rating is IP54 at the shaft bushing without the seal ring, and IP65 on the motor body and with the shaft seal fitted — washdown-ready for food or wet environments.","metaTitle":"Schneider Electric SH31003M02A2000 Servo Motor, 1500 W","metaDescription":"Schneider Electric SH31003M02A2000 SH3 servo motor, 1500 W continuous power, 7.8 Nm nominal torque at 115 V single phase.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"9.5 in (240.5 mm)","Inertia":"0.0 kg.cm² of brake 0.0 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"3.22 kg.cm²","Nominal torque":"69.04 lbf.in (7.8 N.m) 115 V single phase 66.4 lbf.in (7.5 N.m) 230 V single phase 62.0 lbf.in (7 N.m) 400 V three phase 59.83 lbf.in (6.76 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.35 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1500 W","Mounting Support":"International standard flange","Sizing reference":"SH31003M","Back emf constant":"148 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"49.8 mH","Stator resistance":"5.3 Ohm","Maximum current Irms":"14.7 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1470 W 400 V three phase 1700 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4.0","Maximum axial force Fa":"160 N","Output current 3s peak":"14.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.4 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ca61c5bfad52d63ee75ba560458cd0cd.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31003M02A2000/sh3-servomotor-100mm-3-stacks-high-torque-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31003M02A2000/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy SH31003M02A2000 and get a price?","answer":"Submit an RFQ for current pricing and availability — no stock-holding claim is made here."},{"question":"What is the shaft size and keyway on SH31003M02A2000?","answer":"The smooth shaft is 19 mm diameter, 40 mm long, with a 6 mm keyway. No holding brake is fitted."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003M02A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003M02A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}