{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003M02A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003M02A2200","canonicalUrl":"https://aoctrl.com/schneider/SH31003M02A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003M02A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH31003M02A2200, 1500 W continuous power, 7.8 Nm nominal torque at 400 V three-phase, absolute multiturn SinCos Hiperface encoder, IP65, smooth shaft without holding brake, flange size 100 mm.","salesMarkdown":"## Motor ratings across supply voltages The SH31003M02A2200 is a three-phase servo motor from the SH3 series, but its performance depends on what voltage you feed it. At 400 V three-phase it delivers 1470 W nominal output power and 7 Nm nominal torque at 2000 rpm; feed it 480 V three-phase and you get 1700 W at 2400 rpm with 6.76 Nm. On single-phase 230 V it drops to 790 W at 1000 rpm, and on 115 V single-phase it's 410 W at 500 rpm. Continuous stall torque is 8 Nm across the 115...480 V three-phase range, with a peak stall torque of 28.3 Nm for transient overloads. Continuous stall current sits at 3.4 A, while the 3-second peak current is 14.7 A — the drive needs to support that peak for acceleration profiles. ## Encoder and feedback — absolute multitrack This motor ships with an absolute multiturn SinCos Hiperface encoder — no homing sequence needed on power-up, the position is retained. The encoder type matters for drive compatibility: not all servo drives support Hiperface protocol, so confirm the drive's feedback interface before pairing. The back EMF constant is 148 V/krpm at 20 °C, and the torque constant is 2.35 Nm/A at 120 °C copper temperature. These numbers let you calculate the required drive DC bus voltage to achieve rated speed and the current loop gain settings. ## Mechanical fit and environmental sealing Flange size is 100 mm (3.9 in) with an international standard flange pattern — mounts to common servo motor brackets without adapter plates. The shaft is 19 mm diameter, 40 mm long, smooth (no keyway), with a 6 mm key width. Centring collar is 95 mm diameter, 3.5 mm deep. IP65 on the motor body and shaft bushing, IP67 on the housing per IEC 60034-5. That means it handles washdown spray and dust ingress — suitable for food processing or wet machining environments. Cooling is by natural convection only, so no external fan or coolant lines needed. This variant has no holding brake (: Without). If your vertical axis or safety circuit requires a brake, you need a different suffix in the SH3 family — the brake adds rotor inertia and changes the mechanical time constant. ## Sourcing and lifecycle — active production Sourced through independent distribution channels. No minimum order quantity published; single-unit and volume quotes handled per request.","metaTitle":"Schneider Electric SH31003M02A2200 Servo Motor, 1500 W","metaDescription":"Schneider Electric SH31003M02A2200 SH3 servo motor, 1500 W continuous, 7.8 Nm nominal torque at 400 V three-phase.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"9.5 in (240.5 mm)","Inertia":"0.0 kg.cm² of brake 3.22 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"3.22 kg.cm²","Nominal torque":"69.04 lbf.in (7.8 N.m) 115 V single phase 66.4 lbf.in (7.5 N.m) 230 V single phase 62.0 lbf.in (7 N.m) 400 V three phase 59.83 lbf.in (6.76 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.35 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1500 W","Mounting Support":"International standard flange","Sizing reference":"SH31003M","Back emf constant":"148 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"17.4 mH","Stator resistance":"5.3 Ohm","Maximum current Irms":"14.7 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1470 W 400 V three phase 1700 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"14.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.4 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/4e812e2bdb9ef5670a35c7e78e623ea9.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31003M02A2200/sh3-servomotor-100mm-3-stacks-high-torque-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31003M02A2200/alternatives.json"},"ai":{"faq":[{"question":"What is the nominal torque of SH31003M02A2200 at 400 V three-phase?","answer":"At 400 V three-phase the nominal torque is 7 Nm (62.0 lbf.in) at 2000 rpm. Continuous stall torque is 8 Nm across the full voltage range."},{"question":"Does SH31003M02A2200 include a holding brake?","answer":"No, this variant is specified without a holding brake. If your application requires a brake for vertical load holding or safety, select a different suffix in the SH3 series that includes the brake option."},{"question":"What encoder type does SH31003M02A2200 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder. This retains position on power loss and eliminates the need for a homing cycle on restart, but requires a drive with Hiperface interface support."},{"question":"What IP rating does SH31003M02A2200 have?","answer":"IP65 on the motor body and shaft bushing, IP67 on the housing — all per IEC 60034-5. Suitable for washdown environments and dust exposure."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003M02A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003M02A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}