{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003M02F1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003M02F1000","canonicalUrl":"https://aoctrl.com/schneider/SH31003M02F1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003M02F1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with holding brake, SH31003M02F1000, 1500 W continuous power, 100 mm flange, absolute multiturn SinCos Hiperface encoder, IP54/IP65.","salesMarkdown":"## Motor ratings and supply-voltage dependency The SH31003M02F1000 is a three-phase servo motor from the SH3 series, delivering 1500 W continuous power on a 100 mm international standard flange. Nominal speed and torque shift with the supply voltage: at 400 V three-phase the motor delivers 2000 rpm and 7 N.m; at 480 V three-phase it reaches 2400 rpm and 6.76 N.m. The same motor on single-phase 115 V runs at 500 rpm and 7.8 N.m, and on 230 V single-phase at 1000 rpm and 7.5 N.m. Peak stall torque is 28.3 N.m across the 115 to 480 V three-phase range, with a continuous stall torque of 8 N.m. The holding brake holds 9 N.m, which is above the continuous stall — important for vertical-axis loads where the brake must hold the load at rest without motor current. ## Encoder feedback and mechanical interface The motor carries an absolute multiturn SinCos Hiperface encoder — this gives position feedback on power-up without a homing cycle, which matters for applications where the axis position must be known immediately after a power cycle or fault recovery. The shaft is smooth, 19 mm diameter by 40 mm long, with a 6 mm keyway. The motor flange is 100 mm with a 95 mm centring collar and 3.5 mm collar depth, mounting on four 9 mm holes. Overall length is 271.5 mm. ## Environmental sealing and cooling The motor is rated IP54 at the shaft bushing without a shaft seal ring, and IP65 when the shaft bushing is fitted — both per IEC 60034-5. The IP65 rating means the motor body withstands washdown environments, but the connector interface and cable entry must also be sealed for the system to hold the rating. Cooling is natural convection — no external fan or forced air. This limits the continuous torque available at low speeds where self-ventilation is reduced; the continuous stall torque of 8 N.m is the thermal limit at zero speed. ## Sourcing and lifecycle status Sourced through authorized distribution channels. No minimum order quantity beyond the standard package of 1 unit.","metaTitle":"Schneider Electric SH31003M02F1000 Servo Motor with Brake","metaDescription":"Schneider Electric SH31003M02F1000 SH3 servo motor with holding brake, 1500 W continuous power, 100 mm flange, absolute multiturn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10.7 in (271.5 mm)","Inertia":"0.618 kg.cm² of brake 3.22 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"3.838 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"69.04 lbf.in (7.8 N.m) 115 V single phase 66.4 lbf.in (7.5 N.m) 230 V single phase 62.0 lbf.in (7 N.m) 400 V three phase 59.83 lbf.in (6.76 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.35 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1500 W","Mounting Support":"International standard flange","Sizing reference":"SH31003M","Back emf constant":"148 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"17.4 mH","Stator resistance":"5.3 Ohm","Maximum current Irms":"14.7 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1470 W 400 V three phase 1700 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"14.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.4 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0663a6ba1d4da49b1785f537f133017e.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31003M02F1000/sh3-servomotor-100mm-3-stacks-high-torque-smooth-shaft-sincos-multiturn-128-brake-straight-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31003M02F1000/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy SH31003M02F1000 and how do I get a price?","answer":"The SH31003M02F1000 is available to order through independent distribution. Submit an RFQ for current pricing and lead time confirmation against your BOM quantity."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003M02F1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003M02F1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}