{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH31003M02F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH31003M02F2000","canonicalUrl":"https://aoctrl.com/schneider/SH31003M02F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH31003M02F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH31003M02F2000, 1500 W continuous power, three phase, 100 mm flange, IP65, absolute multiturn SinCos Hiperface encoder.","salesMarkdown":"## Motor frame and mounting — 100 mm flange, IP65 shaft bushing The SH31003M02F2000 uses an international standard flange with a 100 mm centring collar diameter and a 3.5 mm centring collar depth, mounting holes at 9.0 mm diameter. The shaft is a smooth 19 mm diameter, 40 mm long, with a 6 mm keyway. IP65 protection at the shaft bushing (per IEC 60034-5) means the motor withstands washdown environments — the sealing is at the bushing, not just the housing. The standard IP54 rating applies at the shaft bushing without the shaft seal ring. ## Torque and speed across supply voltages Nominal torque varies with the supply: 7.8 N·m at 115 V single phase, 7.5 N·m at 230 V single phase, 7.0 N·m at 400 V three phase, and 6.76 N·m at 480 V three phase. Nominal speed follows the same pattern — 500 rpm at 115 V, 1000 rpm at 230 V, 2000 rpm at 400 V, and 2400 rpm at 480 V. Continuous stall torque is 8 N·m across the 115–480 V three-phase range, with a peak stall torque of 28.3 N·m. The holding brake delivers 9 N·m holding torque, securing the load when power is removed. Continuous power is 1500 W; the motor is naturally convection-cooled with no fan, so the thermal budget depends on the mounting surface and ambient airflow. ## Encoder and feedback — absolute multiturn SinCos Hiperface The encoder is an absolute multiturn SinCos Hiperface type, providing position feedback without a home cycle on power-up. This suits applications where the axis position must be known immediately after a power loss or cycle — typical for gantry, rotary indexing, or pick-and-place stations. ## Electrical parameters and thermal limits Stator resistance is 5.3 Ω, stator inductance is 17.4 mH, and the motor has 4 poles. The torque constant is 2.35 N·m/A at 120 °C copper temperature; the back EMF constant is 148 V/krpm at 20 °C. Maximum continuous current is 14.7 A RMS, with a 3-second peak of 14.7 A. The hot-spot copper temperature limit is 130 °C — the winding insulation class governs the continuous duty envelope. Maximum radial force at the shaft is 1050 N at 1000 rpm, derating to 660 N at 4000 rpm; maximum axial force is 160 N.","metaTitle":"Schneider Electric SH31003M02F2000 Servo Motor with Brake","metaDescription":"Schneider Electric SH31003M02F2000 servo motor with brake, 1500 W continuous power, IP65 rated, absolute multiturn encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10.7 in (271.5 mm)","Inertia":"0.618 kg.cm² of brake 3.22 kg.cm² of motor","Key width":"0.2 in (6 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"3.838 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"69.04 lbf.in (7.8 N.m) 115 V single phase 66.4 lbf.in (7.5 N.m) 230 V single phase 62.0 lbf.in (7 N.m) 400 V three phase 59.83 lbf.in (6.76 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"2.35 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1500 W","Mounting Support":"International standard flange","Sizing reference":"SH31003M","Back emf constant":"148 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"250.5 lbf.in (28.3 N.m) 115...480 V three phase","Stator inductance":"17.4 mH","Stator resistance":"5.3 Ohm","Maximum current Irms":"14.7 A","Nominal output power":"410 W 115 V single phase 790 W 230 V single phase 1470 W 400 V three phase 1700 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"4","Maximum axial force Fa":"160 N","Output current 3s peak":"14.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"70.8 lbf.in (8 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm","Mounting holes diameter":"0.4 in (9.0 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.4 A","Maximum mechanical speed":"6000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a6285d5e9061ff2e120d468d9c8d692a.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH31003M02F2000/sh3-servomotor-100mm-3-stacks-high-torque-smooth-shaft-sincos-multiturn-128-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH31003M02F2000/alternatives.json"},"ai":{"faq":[{"question":"What is SH31003M02F2000's phase and power rating?","answer":"The motor is a three-phase unit with 1500 W continuous power. Nominal torque and speed depend on the supply voltage — see the spec table for the full matrix."},{"question":"What IP rating does SH31003M02F2000 carry?","answer":"IP65 at the shaft bushing per IEC 60034-5, with IP54 at the shaft bushing without the shaft seal ring. The IP65 rating means the motor withstands washdown environments when the shaft seal is fitted."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH31003M02F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH31003M02F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}